(WTi)C/石墨/镍基合金复合涂层摩擦磨损性能研究

蔡滨;谭业发;蒋国良;徐婷;谭华;周春华

兵工学报 ›› 2011, Vol. 32 ›› Issue (2) : 192-198.

兵工学报 ›› 2011, Vol. 32 ›› Issue (2) : 192-198. DOI: 10.3969/j.issn.1000-1093.2011.02.011
论文

(WTi)C/石墨/镍基合金复合涂层摩擦磨损性能研究

  • 蔡滨, 谭业发, 蒋国良, 徐婷, 谭华, 周春华
作者信息 +

Research on Friction and Wear Property of (WTi)C/Graphite/Ni-Base Alloy Composite Coatings

  • CAI Bin, TAN Ye-fa, JIANG Guo-liang,XU Ting, TAN Hua, ZHOU Chun-hua
Author information +
文章历史 +

摘要

为了获得既具有自润滑减摩特性又有高耐磨性能的金属摩擦构件表面,提高高接触应力下金为了获得既具有自润滑减摩特性又有高耐磨性能的金属摩擦构件表面,提高高接触应力下金属摩擦副的使用寿命和可靠性,运用等离子喷涂技术在45#钢表面制备了(WTi)C/石墨/镍基合金复合涂层。研究了室温干摩擦条件下复合涂层的摩擦磨损性能,并用SEM和EDX对磨损表面进行了测试分析。结果表明:复合涂层与Si3N4和GCr15对摩时,摩擦系数分别较纯镍基合金涂层降低了35%和38%,耐磨性分别是后者的3倍和3.5倍;与Si3N4对摩时,复合涂层的磨损机理主要是微观切削、疲劳剥落和硬质相脱落。与GCr15对摩时,其磨损机理主要为粘着磨损、多次塑变磨损和层脱剥离。

Abstract

In order to obtain the self-lubrication and anti-wear metal surfaces and improve the service life and reliability of metal friction couples under condition of high contact stress, the composite coatings composed of Ni-base alloy, (W,Ti)C and graphite particles are prepared on the surface of No. 45 steel by plasma spraying process. The friction and wear properties of the coatings are investigated under the conditions of dry friction conditions at room temperature, and the worn surfaces of the composite coatings are analyzed by SEM and EDX. The results show that the friction coefficients of the composite coating are 35% and 38% lower than those of the Ni-base alloy coatings when it rubs againdt Si3N4 and GCr15, and the wear resistance of the former is 3 and 3.5 times

关键词

复合材料 / 等离子喷涂 / (W,Ti)C / 石墨 / 镍基合金 / 减摩 / 耐磨

Key words

composite materials / plasma spraying / (W,Ti)C / graphite / Ni-base alloy / anti-friction / anti-wear

引用本文

导出引用
蔡滨, 谭业发, 蒋国良, 徐婷, 谭华, 周春华. (WTi)C/石墨/镍基合金复合涂层摩擦磨损性能研究. 兵工学报. 2011, 32(2): 192-198 https://doi.org/10.3969/j.issn.1000-1093.2011.02.011
CAI Bin, TAN Ye-fa, JIANG Guo-liang,XU Ting, TAN Hua, ZHOU Chun-hua. Research on Friction and Wear Property of (WTi)C/Graphite/Ni-Base Alloy Composite Coatings. Acta Armamentarii. 2011, 32(2): 192-198 https://doi.org/10.3969/j.issn.1000-1093.2011.02.011

参考文献

[1] 赵运才,熊宏杰,张正旺. 润滑相MoS2对等离子喷涂Ni60A复合涂层摩擦
学性能的影响[J]. 中国陶瓷,2008,44(12):29-31.
ZHAO Yun-cai,XIONG Hong-jie,ZHANG Zheng-wang. The influence of lubricating
phase MoS2 on Ni60A composite coatings fictional characteristics[J]. China C
eramics,2008,44(12):29-31. (in Chinese)
[2] 胡正前,张文华,孙文华. 等离子喷涂TiC-Ni-Mo金属陶瓷涂层成分对组
织与性能影响的研究[J]. 复合材料学报,1999,16(3):87-92.
HU Zheng-qian,ZHANG Wen-hua,SUN Wen-hua. Effect of the ingredient of plasma
spraying TiC-Ni-Mo cermets coatings on the microstructure and properties[J]
. Acta Materiae Compositae Sinica,1999,16(3):87-92. (in Chinese)
[3] 白彬,肖云峰,郎定木,等. 等离子喷涂Sn和ZrO2涂层/U-Nb合金摩擦副
的摩擦性能[J]. 稀有金属材料科学与工程,2005,34(7):1114-1118.
BAI Bin,XIAO Yun-feng,LANG Ding-mu,et al. Friction characteristics of plasm
a-sprayed Sn and ZrO2 coatings against U-Nb Alloy[J]. Rare Metal Materials
And Engineering,2005,34(7):1114-1118. (in Chinese)
[4] OuyangJ H, Pei Y T, Lei T C. Tribological behaviour of lase
r-clad TiCp composite coating[J]. Wear,1995,185:167-172.
[5] WANG H,XIA W M, JIN Y S. A study on abrasive resistance
of Ni-based coatings with WC hard phase[J]. Wear,1996,195:47-52.
[6] Bahadur S,Yang Chien-nan. Friction and wear behavior of tungsten and
titanium carbide coatings[J]. Wear,1996,196:156-163.
[7] Betancourt-Dougherty L C, Smith R W. Effects of load and sliding spe
ed on the wear behaviour of plasma sprayed TiC-NiCrBSi coatings[J]. Wear,199
8,217:147-154.
[8] Li Q,Song G M, Zhang Y Z. Microstructure and dry sliding wear be
havior of laser clad Ni-based alloy coating with the addition of SiC[J]. Wear
,2003,254:222-229.
[9] 潘蛟亮,王引真,李方坡,等. Ni包MoS2添加剂对镍基涂层的摩擦磨损性
能影响[J]. 摩擦学学报,2008,28(3):225-229.
PAN Jiao-liang,WANG Yin-zhen,LI Fang-po,et al. Effect of MoS2 coated wit
h nickel on tribological properties of Ni-based coating[J]. Tribology,2008,
28(3):225-229. (in Chinese)
[10] 潘蛟亮,王引真,李方坡 等. Ni包石墨对镍基涂层摩擦学性能的影响[J
]. 热加工工艺,2007,36(19):57-59.
PAN Jiao-liang,WANG Yin-zhen,LI Fang-po,et al. Effects of Ni-coated graph
ite on tribological properties of Ni-based coating[J]. Hot Working Technology
,2007,36(19):57-59. (in Chinese)
[11] 李炯辉. 金属材料金相图谱[M]. 北京:机械工业出版社,2006.
LI Bing-hui. Metallographic atlas of metals[M]. Beijing: China Machine Press,2006. (in Chinese)
[12] 刘素芹,黄金亮,田保红, 等. Ni基激光熔覆合金层的组织结构及热腐蚀
性能[J]. 热加工工艺,2008,37(13):99-101.
LIU Su-qin, HUANG Jin-liang, TIAN Bao-hong, et al. Microstructure and heat
-corrosion resistance of laser cladding layer of Ni-base alloys[J]. Hot Work
ing Technology,2008,37(13):99-101. (in Chinese)
[13] Li Q , Lei T C, Chen W Z. Microstructural characterization o
f laser-clad TiCp-reinforced Ni-Cr-B-Si-C composite coatings on steel[J]
. Surface and Coatings Technology,1999,114:278-284.
[14] 贺定勇,傅斌友,蒋建敏, 等. 含WC陶瓷相电弧喷涂层耐磨粒磨损性能的
研究[J]. 摩擦学学报,2007,27(2):116-120.
HE Ding-yong,FU Bin-you,JIANG Jian-min,et al. Abrasive resistance of arc s
prayed coatings with a WC ceramic phase[J]. Tribology,2007,27(2):116-120.
(in Chinese)
[15] 尹斌,周惠娣,陈建敏, 等. 等离子喷涂纳米WC-12%Co涂层与陶瓷和不锈
钢配副时的摩擦磨损性能对比研究[J]. 摩擦学学报,2008,28(3):213-217.
YIN Bin,ZHOU Hui-di,CHEN Jian-min,et al. Comparative study of the friction
and wear behavior and wear mechanism of plasma sprayed WC-12% Co coatings match
ed with ceramic and stainless steel balls under dry sliding Condition[J]. Trib
ology,2008,28(3):213-217. (in Chinese)

371

Accesses

0

Citation

Detail

段落导航
相关文章

/