通过某型高强化柴油机全工况热平衡台架试验，分析了柴油机本体出水温度对柴油机本体散热及中冷器散热规律的影响；指出高强化柴油机智能化控制冷却系统应采用高、低温双循环回路方案，其中高温回路主要用于冷却柴油机本体，而低温回路应以控制增压空气温度为目标对中冷器冷却强度进行独立调节，从而有效地改善高强化柴油机的综合性能。
Abstract
Based on the full condition heat balance bench test of a certain high strengthened diesel en?gine, the backwater temperature’s effects on heat losses of diesel engine body and intercooler were an?alyzed ;the high-low temperature cycles were proposed in adopted by intelligent control cooling system of the engine, of wmch the high temperature cycle is mainly used to cool diesel engine body and the low temperature cycle is used to adjust independently cooling intensity of intercooler by controlling temperature of charged air, to improve effectively comprehensive performance of the engine.
关键词
动力机械及工程 /
柴油机 /
热平衡 /
台架试验 /
中冷器
{{custom_keyword}} /
Key words
power machinery and engineering /
diesel engine /
heat balance /
bench test /
intercooler
{{custom_keyword}} /
{{custom_sec.title}}
{{custom_sec.title}}
{{custom_sec.content}}
参考文献
[1] 俞小莉,李婷.发动机热平衡仿真研究现状与发展趋势[J].车 用发动机，2005，（10):1-5.
YU Xiao-li, Li Ting. Research and development in thermal bal-ance simulation for the engine[J] ? Vehicle Engine, 2005, (10): I — 5. (in Chinese)
[2] 于世元.涡轮增压器原理、结构和使用[M].北京:国防エ业出 版社,1985:14 — 15.
YU Shi-yuan. Tneory, configuration ana use of turbocharger [M]. Beijing： National Defence Industry Press, 1985： 14-15. (in Chinese)
[3] 张万里,张锡朝,焦其伟.WD615发动机低负荷热平衡分析[J].内燃机与动カ装置，2006，（5) :14-17.
ZHANG Wan-li, ZHANG Xi-chao, JIAO Qi-wei- Thermal equi?librium analysis of WD615 diesel engine in underload condition [J] - Internal Combustion Engine & Powerplant, 2006，（5):14 -17. (in Chinese)
[4] 姚仲鹏，王新国.车辆冷却传热[M].北京:北京理工大学出版 社，2001:140-141.
YAO Zhong-peng，WANG- Xin-guo. Cooling and heat transfer ot vehicle [ M ]. Beijing： Beijing Institute of Technology Press, 2001 ： 140 — 141. (in Chinese)
[5] 魏春源，张卫正，葛蕴珊.高等内燃机学[M].北京:北京理工 大学出版社，2001:233 - 239.
WEI Chun-yuan, ZHANG Wei-zheng, GE Yun-shan. Altitude theory of internal-combustion engine[Mj. Beijing： Beijing Insti?tute of Technology Press, 2001 ：233 - 239. (in Chinese)
{{custom_fnGroup.title_cn}}
脚注
{{custom_fn.content}}
