研究了振动铰削抑制积屑瘤形成的机理，在此基础上通过浮动铰刀振动铰削小口径火炮身管的实验，分析了振动铰削对火炮身管内膛表面粗糙度的影响。振动铰削把普通铰削的连续切削过程转变为断续的脉冲式切削过程，将普通铰削时的螺旋状连续切屑变成了非常细小的针状单元切屑，增强了铰削加工的断屑排屑能力，从根本上抑制了积屑瘤的形成，避免了巳加工表面的犁沟和鳞刺。实验表明：振动铰削的表面粗糙度Ra比普通铰削至少提高3级；振动铰削的表面粗糙度Ry不到普通铰削的1/5;振动铰削使孔的巳加工表面均匀一致，显著提高了身管内膛的表面质量。
Abstract
The mechanism of suppressing the formation of built-up-edge (BUE) of vibration reaming was studied. The vibration reaming experiments of a small caliber gun tube were carried out by the au?to aligning reamer. The influence of vibration reaming on surface roughness of gun tube was analyzed.
The continuous cutting process of the conventional reaming was transformed into the pulsed intermit?tent cutting process, so that the continuous helical cmp of the conventional reaming was transformed into the minute acicular cell chip of the vibration reaming. The capability of chip-breaking and chip-re?moving of reaming was improved, tnerefore the formation of built-up edge was suppressed, which avoids the generation of plough ditch and scales of hole surface. The experimental results indicate that the surface roughness Ra of the vibration reaming is enhanced at least 3 levels than that of the conven?tional reaming; and the surface roughness Ry is less than one-fifth of the conventional reaming; The surface quality of gun tube is greatly improved.
关键词
机械制造ェ艺与设备 /
振动铰削 /
表面粗糙度 /
浮动铰刀 /
火炮身管 /
表面质量
{{custom_keyword}} /
Key words
manufacturing processes and equipment /
vibration reaming /
surface roughness /
auto aligning reamer /
gun tube /
surface quality
{{custom_keyword}} /
{{custom_sec.title}}
{{custom_sec.title}}
{{custom_sec.content}}
参考文献
[1] 隈部淳一郎.精密加工振动切削：基础与应用[M].韩ー昆,薛 万夫，等，译.北京:机械エ业出版社，1985：323 -333.
KumaDe J. fundamentals and application of vibration cutting [M]. HAN Yi-kun, XUE Wan-fu, et al, translated. Beijing： China Machine Press, 1985 ： 323 - 333. (in Chinese)
[2] 李祥林，薛万夫，张日升.振动切削及其在机械加工中的应用 [M].北京:北京科学技术出版社，1985 ： 269 - 276.
LI Xiang-lin, XUE Wan-fu, ZHANG Ri-sheng. Vibration cutting and its application in machining [M」? Beiung: Beijing Science and Technology Press, 1985 ： 269 — 276. (in Chinese)
[3] 张建中，李秀人，李蕾.超声波激振铰刀干式铰孔译验研究[J]. 电加工与模具，2003,(4):27-29.
ZHANG Jian-zhong, LI Xiu-ren, LEI Le1. Study on dry reaming technology with ultrasonic wave excitation reamer [ J]. Electro?machining and Mould, 2003，(4) ： 27 - 29. (in Chinese)
[4] 何振俊.振动切削在铰孔中的应用[J].石河子大学学报：自然 科学版，2002，6(2):140-142.
HL Zhen-Jun. Vibration cutting applied in reaming a hole [ J ]. Journal of Shihezi University： Natural Science, 2002，6(2):140 -142. (in Chinese)
[5] 张德远，王立江.振动钴削的局部断屑特性[J].应用科学学报， 1993,11(4):337-343.
ZHANG De-yuan, WANG Li-jiang. Partly chip breaking charac?teristic in vibration drilling [ J ]. Journal of Applied Science, 1993，11(4)： 337-343. (in Chinese)
{{custom_fnGroup.title_cn}}
脚注
{{custom_fn.content}}
