Spatial rotation multi-axis parallelism adjustment and calibration technology

Zhao Wei;Chang Ming;Liu Hu;Zhao Hongjun;Jiang Feng;Li Yuxi;Zhang Xiangming;Yang Xiaoqiang

  • Sponsored by:

    Editor-In-Chief:

    ISSN 1002-2082

     
  • Hosted By:

    Published By: Journal of Applied Optics

    CN 61-1171/O4

Journal of Applied Optics ›› 2018, Vol. 39 ›› Issue (5) : 627-632. DOI: 10.5768/JAO201839.0501006

Spatial rotation multi-axis parallelism adjustment and calibration technology

  • Zhao Wei1, Chang Ming1, Liu Hu1, Zhao Hongjun1, Jiang Feng1, Li Yuxi1, Zhang Xiangming1, Yang Xiaoqiang1
Author information +
History +

Abstract

The optical axis parallelism of the spatial rotating multi-optical axis system affects the pointing accuracy of the system and is difficult and time consuming to calibrate.Based on the optical axis calibration principle of the spatial rotating multi-optical axis system, the calibration theoretical model was obtained. Combined with the experimental research, a high-precision optical axis calibration scheme was established. Taken the mechanical rotation axis as the reference target, the coarse and fine adjustments were combined, the coarse adjustment was performed for the sensor mounting surface and the fine alignment of optical magnitude was implemented by means of double wedges. Firstly, the parallelism between the visible light axis and the mechanical rotary axis was calibrated, then the parallelism between the laser axis and the mechanical rotary axis was guaranteed, and finally the parallelism between the visible light axis and the laser axis was guaranteed. The experimental results show that the calibration scheme is accurate and efficient, the index is better than 0.1 mrad, which can be used for practical engineering.

Key words

optical axis parallelism / spatial rotation / high-power laser / calibration

Cite this article

Download Citations
Zhao Wei, Chang Ming, Liu Hu, Zhao Hongjun, Jiang Feng, Li Yuxi, Zhang Xiangming, Yang Xiaoqiang. Spatial rotation multi-axis parallelism adjustment and calibration technology. Journal of Applied Optics. 2018, 39(5): 627-632 https://doi.org/10.5768/JAO201839.0501006

References

李思众, 鱼云岐, 陈静, 等.一种多光路光轴平行性检测系统[J].应用光学, 2013, 34(4): 644-647.
柏公欣, 安志勇, 肖作江, 等.激光瞄具多轴一致性检测系统研究[J].长春理工大学学报, 2012, 35(2): 20-25.
詹启海, 常本康, 富容国.多光谱光学系统光轴平行性组合测试装置[J].应用光学, 2005, 26(5): 4-6.
陈文建, 郑宝忠, 杨建莉.多光谱多光轴自动校准技术[J].应用光学, 2004, 25(1): 60-64.
纪小辉, 杨璐, 姜旭.一种多光谱多光轴准直系统的设计[J].应用光学, 2013, 34(6): 894-897.
张雏, 周冰, 沈学举, 等.精确校正激光测距仪三光轴平行的理论计算方法研究[J].光学精密工程, 2002, 10(6): 650-653.
韩军, 王晶, 陈文建.空间旋转多光谱多光轴校准技术研究[J].激光与红外, 2009, 39(4): 415-418.
杨海成, 王章利.潜望式观瞄系统的瞄准轴系误差分析与调校[J].应用光学, 2013, 34(2): 193-197.
吕溥, 韩国华.双光
LI Sizhong, YU Yunqi, CHEN Jing, et al. System for parallelism detection of multi-spectrum optical axes[J]. Journal of Applied Optics, 2013, 34(4): 644-647.
BAI Gongxin, AN Zhiyong, XIAO Zuojiang, et al. Research on detection system for multi-axes parallelism of laser sighting telescope[J]. Journal of Changchun University of Science and Technology, 2012, 35(2): 20-25.
ZHAN Qihai, CHANG Benkang, FU Rongguo. Optical axes boresight instrument for multispectral optical system[J]. Journal of Applied Optics, 2005, 26(5): 4-6.
CHEN Wenjian, ZHENG Baozhong, YANG Jianli. Auto collimating technique of multispectral and multibeam Axes[J]. Journal of Applied Optics, 2004, 25(1): 60-64.
JI Xiaohui, YANG Lu, JIANG Xu. Design of multi-optical-axis and multi-spectral collimation system[J]. Journal of Applied Optics, 2013, 34(6): 894-897.
ZHANG Chu, ZHOU Bing, SHEN Xueju, et al. Study of the calculation method for accurately adjusting laser-range-finders three-optic-axes to parallel to each other[J]. Optic

22

Accesses

0

Citation

Detail

Sections
Recommended

/