A new method depending on weighed least square was proposed, aiming at the shortcomings of the existing interferogram calibration method. It used the edge information differences between standard parts edges and fringes edges, then extracted the target edges by using appropriate mask, and finally used the weighed least square way to position the edge more exactly. The new method can figure out the real length of each pixel finally depending on the standard parts known size. The experiments show that this method costs half time than Hough transform, and the positioning accuracy is less than 1 pixel. It can calibrate each type of interferogram well with strong practicability.
Key words
weighted least square /
optical interferometry /
edge detection /
interferogram’s calibration
{{custom_keyword}} /
{{custom_sec.title}}
{{custom_sec.title}}
{{custom_sec.content}}
References
[1]Daniel Malacara. Optical shop testing [M].3rd ed. New Jersey: John Wiley & Sons, Inc.,2007.
[2]Gu Guoqing, Wang Kaifu, Yan Xinjiu. Electronic speckle interferometry image processing based on homomorphic filtering[J]. Laser Technology, 2010, 34(6):750-752
顾国庆，王开福，艳新九.基于同态滤波的电子散斑干涉图像处理[J]. 激光技术，2010，34（6）：750-752.
[3]Liu Tingrui, He Haitao. Automated single fringe-pattern analysis with high accuracy [J]. Optical Instruments, 2003, 25(5):10-14.
刘廷瑞，何海涛.高精度单幅干涉图自动处理方法[J]. 光学仪器，2003，25（5）：10-14.
[4]Li Yanhua. Research on the filtering and skeletonization algorithms of optical interferometry images [D]. Harbin:Harbin Institute of Technology, 2011
李艳华.光干涉图像的滤波和骨架化算法研究[D]. 哈尔滨:哈尔滨工业大学，2011.
[5]Wei Caiyun. Interferogram spatial processing and application research[D].Nanjing: N
{{custom_fnGroup.title_en}}
Footnotes
{{custom_fn.content}}
