［1］ZamaniM, Amadeh A, Baghal S M L. Effect of Co content on electrodeposition mechanism and mechanical properties of electrodeposited Ni-Co alloy[J]. Transactions of Nonferrous Metals Society of China, 2016, 26(2):484-491.
[2］刘霁云, 赵阳, 董世运, 等. 退火对镍钴合金镀层结构及力学性能的影响[J].金属热处理,2017,42(6):80-83.
LIU Ji-yun, ZHAO Yang, DONG Shi-yun, et al. Effect of annealing on microstructure and mechanical properties of Ni-Co alloy coating[J]. Heat Treatment of Metals, 2017, 42(6):80-83. (in Chinese)
[3］刘霁云, 赵阳, 董世运, 等.镍-钴合金镀层研究进展[J].电镀与精饰, 2017,39(7):21-25.
LIU Ji-yun, ZHAO Yang, DONG Shi-yun, et al. Research progress of Ni-Co alloy coating[J].Plating and Finishing, 2017,39(7): 21-25. (in Chinese)
[4］迟玉中, 刘雁红, 王新庄.电沉积镍钴纳米合金的制备及性能[J].天津科技大学学报, 2007, 22(3):40-43.
CHI Yu-zhong, LIU Yan-hong, WANG Xin-zhuang. Preparation and properties of electrodeposited Ni-Co nanocrystalline alloys[J]. Journal of Tianjin University of Science & Technology, 2007, 22(3): 40-43. (in Chinese)
[5］Moina C A, Vazdar M. Electrodeposition of nano-sized nuclei of magnetic Co-Ni alloys onto n-Si (1 0 0)[J]. Electrochemistry Communications, 2001, 3(4):159-163.
[6］Yang Y Y, Deng B. Preparation of Ni-Co alloy foils by electrodeposition[J]. Advances in Chemical Engineering and Science, 2011, 1(2):27-32.
[7］王立平, 高燕, 刘惠文, 等.相结构对Ni-Co合金镀层摩擦磨损性能的影响[J].电镀与环保, 2005,25(2):14-16.
WANG Li-ping, GAO Yan, LIU Hui-wen, et al. Effects of phase structure on the friction and wear properties of electrodeposited Ni-Co deposits[J]. Electroplating and Pollution Control, 2005,25(2): 14-16. (in Chinese)
[8］刘学武, 许韵华, 胡芃, 等. 高频脉冲电镀镍钴合金镀层的耐磨性[J]. 电镀与涂饰, 2013,32(9): 18-22.
LIU Xue-wu, XU Yun-hua, HU Peng, et al. Wear resistance of nickel-cobalt alloy coating by high-frequency pulse plating [J]. Electroplating and Finishing, 2013,32(9):18-22. (in Chinese)
[9］王立平, 高燕, 刘惠文, 等. Ni-Co/纳米金刚石复合镀层抗磨损性能的研究[J].中国表面工程, 2005, 18(1):24-26.
WANG Li-ping, GAO Yan, LIU Hui-wen, et al. Study on the anti-wear behavior of Ni-Co/diamond nanocomposite coatings[J]. Surface Engineering of China, 2005, 18(1):24-26.(in Chinese)

[10］李艳. 电沉积Ni-Co合金工艺条件的研究[J]. 化工技术与开发, 2004,33(4):5-7.
LI Yan. Study on process of Ni-Co alloys electrodeposition [J]. Chemical Technology and Development, 2004, 33(4):5-7. (in Chinese)
[11］王立平, 高燕, 刘惠文, 等. 电沉积梯度Ni-Co纳米合金镀层的研究[J]. 电镀与涂饰, 2004, 23(6):5-11.
WANG Li-ping, GAO Yan, LIU Hui-wen, et al. Study on electrodeposition of graded Ni-Co nanocrystalline alloys [J]. Electroplating and Coating, 2004, 23(6):5-11. (in Chinese)
[12］赵亚亚.电沉积制备纳米晶镍基合金材料及性能研究[D].长春:长春工业大学, 2016.
ZHAO Ya-ya.Study on preparation and properties of nanocrystalline Ni-based alloy coating[D].Changchun: Changchun University of Technology, 2016. (in Chinese)
[13］兰新武. Ni-Co合金镀层的制备及其应用于汽车缸套的可行性分析[J]. 电镀与环保, 2017, 37(1):25-28.
LAN Xin-wu. Preparation of Ni-Co alloy coating and feasibility analysis of Ni-Co alloy coating applied on automobile cylinder liner [J]. Electroplating and Environmental Protection, 2017, 37(1): 25-28. (in Chinese)
[14］宫晓静.高频脉冲电镀镍钴合金机械性能的研究[D].北京:北京交通大学, 2007.
GONG Xiao-jing. Study on mechanical performance of high frequency pulse electroforming Ni-Co alloy[D].Beijing: Beijing Jiaotong University, 2007.(in Chinese)
[15］钟远辉, 戴品强, 许伟长, 等. 脉冲电沉积纳米晶Ni-Co合金镀层腐蚀特性研究[J]. 稀有金属材料与工程, 2009,38(6): 1053-1057.
ZHONG Yuan-hui, DAI Pin-qiang, XU Wei-chang, et al. Corrosion characteristic of pulsed electrodeposition nanocrystalline Ni-Co alloy coating [J]. Rare Metal Materials and Engineering, 2009, 38(6):1053-1057. (in Chinese)
[16］TuryB, Lakatos-Varsanyi M, Roy S. Ni-Co alloys plated by pulse currents[J].Surface and Coatings Technology, 2006, 200(24): 6713-6717.
[17］Zamani M, Amadeh A, Baghal S M L. Effect of Co content on electrodeposition mechanism and mechanical properties of electrodeposited Ni-Co alloy[J]. Transactions of Nonferrous Metals Society of China, 2016, 26(2):484-491.
[18］许伟长, 戴品强, 郑耀东. 钴含量对电沉积纳米晶镍钴合金组织与力学性能的影响[J].中国有色金属学报, 2010,20(1): 92-99.
XU Wei-chang, DAI Pin-qiang, ZHENG Yao-dong. Effect of Co content on structures and mechanical properties of electrodeposited nanocrystalline Ni-Co alloys[J]. The Chinese Journal of Nonferrous Metals, 2010,20(1):92-99. (in Chinese)
[19］张亚鹏.纳米粒子改性镍钴电镀层的制备及性能研究[D]. 北京: 北京工业大学, 2016.
ZHANG Ya-peng. Preparation and properties of nano-particle modified nickel-cobalt electroplating layer [D]. Beijing: Beijing University of Technology, 2016. (in Chinese)
[20］高吉成.脉冲电铸镍钴合金成型工艺及性能研究[D].扬州:扬州大学, 2012.
GAO Ji-cheng. Study on forming process and properties of pulse electroplating nickel-cobalt alloy[D]. Yangzhou:Yangzhou University, 2012. (in Chinese)
[21 ］Golodnitsky D, Yu R, Ulus A. The role of anion additives in the electrodeposition of nickel-cobalt alloys from sulfamate electrolyte[J]. Electrochimica Acta, 2003, 47(17):2707-2714.
[22］刘海鹏, 杨海丽, 王心悦, 等. 镀液温度对脉冲电镀Zn-Ni-Mn合金镀层的影响[J]. 电镀与精饰, 2016, 38(10):15-18.
LIU Hai-peng, YANG Hai-li, WANG Xin-yue, et al. Effect of bath temperature on Zn-Ni-Mn alloy coating prepared by pulse electroplating[J]. Plating and Finishing, 2016, 38(10):15-18. (in Chinese)
[23］杜明华, 李宁, 武刚, 等.电沉积参数对Co-Ni合金镀层的影响[C]∥电子电镀年会论文集.深圳:中国电子学会, 2003:52-55.
DU Ming-hua, LI Ning, WU Gang, et al. The effect of electrodeposition parameters on the Co-Ni alloy coating[C]∥Proceedings of National Conference on Electroplating. Shenzhen: China Electronics Society, 2003:52-55. (in Chinese)




第39卷第4期2018年4月兵工学报ACTA
ARMAMENTARIIVol.39No.4Apr.2018