炮钢材料动态本构模型及其验证

曾志银;高小科;刘朋科;喻华萨

兵工学报 ›› 2015, Vol. 36 ›› Issue (11) : 2038-2044.

兵工学报 ›› 2015, Vol. 36 ›› Issue (11) : 2038-2044. DOI: 10.3969/j.issn.1000-1093.2015.11.004
论文

炮钢材料动态本构模型及其验证

  • 曾志银,高小科,刘朋科,喻华萨
作者信息 +

Dynamic Constitutive Model of Gun Steel Material and Its Verification

  • ZENG Zhi-yin, GAO Xiao-ke, LIU Peng-ke, YU Hua-sa
Author information +
文章历史 +

摘要

在温度88~573 K和应变率0.001~2 000 s-1的条件下,通过温度与应变率耦合的静态和动态分离式Hopkinson压杆实验,并以初步获得的炮钢材料动态本构模型基本参数为基础,通过进一步的优化及Taylor杆冲击实验,验证并最终确认了炮钢材料动态本构模型参数,模型预测与实验结果相对误差小于5%. 验证结果表明,建立的炮钢材料动态本构模型能真实地反映其动态响应。

Abstract

The static and dynamic SHPB (split Hopkinson pressure bar) tests are made on a gun steel material at the temperature of 88~573 K and the strain rate of 0.001~2 000 s-1. The preliminarily obtained parameters of constitutive model of some gun steel material are verified and confirmed by the optimization procedure and Taylor impact test. The difference between the predicted and experimental results is less than 5%. The experimental results show that the proposed dynamic constitutive model can reflect the dynamic response of gun steel material under loads effectively.

关键词

兵器科学与技术 / 炮钢材料 / 本构模型 / Hopkinson压杆实验 / Taylor杆冲击实验

Key words

ordnance science and technology / gun steel material / constitutive model / Hopkinson pressure bar test / Taylor impact test

引用本文

导出引用
曾志银,高小科,刘朋科,喻华萨. 炮钢材料动态本构模型及其验证. 兵工学报. 2015, 36(11): 2038-2044 https://doi.org/10.3969/j.issn.1000-1093.2015.11.004
ZENG Zhi-yin, GAO Xiao-ke, LIU Peng-ke, YU Hua-sa. Dynamic Constitutive Model of Gun Steel Material and Its Verification. Acta Armamentarii. 2015, 36(11): 2038-2044 https://doi.org/10.3969/j.issn.1000-1093.2015.11.004

基金

国家“973”计划项目(6133116)

参考文献

[1] MeyersM A. 材料的动力学行为[M]. 张庆明, 刘彦, 黄风雷, 等,译. 北京:国防工业出版社, 2006:225-230,259-260.
Meyers M A. Dynamic behavior of materials[M]. ZHANG Qing-ming, LIU Yan, HUANG Feng-lei, et al, translated. Beijing: National Defense Industry Press, 2006: 225-230,259-260. (in Chinese)
[2] 苏静,郭伟国,曾志银,等. 超高强度钢AF1410塑性流动特性

及其本构关系[J].固体力学学报,2012, 33(3):265-272.
SU Jing, GUO Wei-guo, ZENG Zhi-yin, et al. Plastic flow characteristics and constitutive relation for ultra high strength steel AF1410[J]. Chinese Journal of Solid Mechanics, 2012,33(3):265-272. (in Chinese)
[3] 张伟,魏刚,肖新科.2A12铝合金本构关系和失效模型[J].兵工 学报,2013,34(3):276-282.
ZHANG Wei,WEI Gang,XIAO Xin-ke. Constitutive relation and fracture criterion of 2A12 aluminum alloy[J]. Acta Armamentarii, 2013,34(3):276-282. (in Chinese)
[4] 闫洪霞, 高重阳.BCC金属物理型动态本构关系及在钽中的应用[J]. 兵工学报,2010,31(增刊1):149-153.
YAN Hong-xia, GAO Chong-yang. A physically based constitutive model for BCC metals and its application in tantalum[J]. Acta Armamentarii, 2010,31(S1):149-153. (in Chinese)
[5] 李国和,王敏杰,康仁科. Fe-36Ni高温高应变率动态力学性能及其本构关系[J]. 材料科学与工艺,2010,18(6):824-828.
LI Guo-he,WANG Min-jie,KANG Ren-ke. Dynamic mechanical properties and constitutive model of Fe-36Ni invar alloy at high temperature and high strain rate[J]. Materials Science & Techno- logy,2010,18(6):824-828. (in Chinese)
[6] BobbiliR, Madhu V, Gogia A K. Neural network modeling to evaluate the dynamic flow stress of high strength armor steels under high strain rate compression[J]. Defence Technology, 2014, 10(4): 334-342.
[7] 郭伟国,李玉龙,索涛. 应力波基础简明教程[M].西安:西北工业大学出版社,2007:129-132.
GUO Wei-guo, LI Yu-long, SUO Tao. Foundation concise course of stess wave[M].Xi'an: Northwestern Polytechnical University Press,2007:129-132.(in Chinese)
[8] 马晓青,韩峰. 高速碰撞动力学[M]. 北京:国防工业出版社,1998:135-144.
MA Xiao-qing, HAN Feng. Dynamic of highspeed impact[M]. Beijing:National Defense Industry Press, 1998:135-144. (in Chinese)
[9] 时党勇,李裕春,张胜民. 基于ANSYS/LS-DYNA8.1进行显式动力分析[M].北京:清华大学出版社,2005:331-340.
SHI Dang-yong, LI Yu-chun, ZHANG Sheng-min. The explicit dynamic base on ANSYS/LS-DYNA8.1[M]. Beijing: Tsinghua University Press, 2005:331-340 (in Chinese)

文章所在专题

爆炸冲击与先进防护

610

Accesses

0

Citation

Detail

段落导航
相关文章

/