为研究发射药螺杆挤出成型工艺，采用硝化棉(NC)代料二醋酸纤维素(CDA)、通过狭缝流变仪研究了物料在螺杆挤出成型过程中的在线流变行为。结果表明，CDA溶液为一种非牛顿假塑性流体，提高加工温度有利于改善物料的流动性并降低机头压力。同时利用计算机辅助工程软件Polyflow对挤出机机头流道内物料的流变行为进行了数值模拟，选取Power模型，得到流道内物料的压力分布、剪切速率分布和剪切粘度分布，模拟结果与实验数据相近。模拟结果表明，螺杆转速增大，物料的剪切粘度降低，但同时增大了机头压力和压降速率，不利于发射药的质量和加工的安全性。CDA溶液挤出成型过程中在线流变行为及其数值模拟计算的研究，对发射药的连续挤出成型具有重要的指导意义。
Abstract
The die rheometer is utilized to investigate the in-line rheological behaviors of CDA solution, as the substitute of NC, in extrusion processing. The experimental results demonstrate that CDA solution is a non-Newtonian pseudoplastic fluid, and the increase in processing temperature is in favor of improving the rheological behaviors of CDA solution. The finite element software Polyflow is provided for the numerical simulation of CDA solution in the die to get the distribution of pressure, shear rate and shear viscosity. A power model is applied as the constitutive equation. The data calculated by the numerical simulation is close to the results obtained from the experiment. Polyflow indicates that the higher screw speed not only decreases the viscosity but also increases the pressure and pressure drop rate which is disadvantageous to the quality and processing security of propellants. The experiment and numerical simulation of the in-line rheological behaviors of CDA solution have the guiding significance for the continuous processing of gun propellants.
关键词
兵器科学与技术 /
二醋酸纤维素 /
剪切粘度 /
压力 /
Polyflow
{{custom_keyword}} /
Key words
ordnance science and technology /
cellulose acetate /
shear viscosity /
pressure /
Polyflow
{{custom_keyword}} /
{{custom_sec.title}}
{{custom_sec.title}}
{{custom_sec.content}}
参考文献
［1］ 王泽山, 欧育湘, 任务正. 火炸药科学技术［M］. 北京: 北京理工大学出版社, 2005: 242-261.
WANG Ze-shan, OU Yu-xiang, REN Wu-zheng. Explosives and propellants science and technology［M］. Beijing: Beijing Institute of Technology Press, 2005: 242-261. (in Chinese)
［2］ 高春红. 烟用二醋酸纤维工业进展［J］. 烟草科技, 1999(5): 9-11.
GAO Chun-hong. Ultrafine fibrous cellulose membranes from electrospinning of cellulose acetate［J］. Tobacco Science and Techno-logy,1999(5): 9-11. (in Chinese)
［3］ Liu H Q, Hsieh Y L. Ultrafine fibrous cellulose membranes from electrospinning of cellulose acetate［J］. Journal of Polymer Science Part B: Polymer Physics, 2002, 40(18): 2119-2129.
［4］ Bendaoud A, Chalamet Y. Plasticizing effect of ionic liquid on cellulose acetate obtained by melt processing［J］. Carbohydrate Polymers, 2014, 108: 75-82.
［5］ Ali S F A. Biodegradation properties of poly-epsilon-caprolactone, starch and cellulose acetate butyrate composites［J］. Journal of Polymers and the Environment, 2014, 22(3): 359-364.
［6］ Griswold P, Cuculo J. An experimental study of the relationship between rheological properties and spinnability in the dry spinning of cellulose acetate-acetone solutions［J］. Journal of Applied Polymer Science, 1974, 18(10): 2887-2902.
［7］ Musaev K N, Usmanov T I,Yunusov Y M, et al. Effect of molecular and compositional heterogeneity on the rheological properties of cellulose acetate solutions［J］. Fibre Chemistry, 1993, 25(1): 21-24.
［8］ 唐爱民, 陈港, 武书彬, 等. 二醋酸纤维素丙酮溶液的流变性质 研究［J］. 纤维素科学与技术, 2001, 9(3): 11-18.
TANG Ai-min, CHEN Gang, WU Shu-bin, et al. Studies on the rheological properties of cellulose acetate-acetone solutions［J］. Journal of Cellulose Science and Technology, 2001, 9(3): 11-18. (in Chinese)
［9］ 杨庆, 沈新元, 郯志清, 等. 醋酸纤维素/壳聚糖纺丝原液的流变性能研究［J］. 纤维素科学与技术, 2006, 14(2): 27-34.
YANG Qing, SHEN Xin-yuan, TAN Zhi-qing， et al. Studies on the rheological behavior of cellulose acetate/chitosan spinning dope［J］. Journal of Cellulose Science and Technology, 2006, 14(2): 27-34. (in Chinese)
［10］ Rudaz C, Budtova T. Rheological and hydrodynamic properties of cellulose acetate/ionic liquid solutions［J］. Carbohydrate Polymers, 2013, 92(2): 1966-1971.
［11］ 杨佳黎, 柳和生, 黄兴元, 等. Polyflow逆向挤出功能在T型材口模设计中的应用［J］. 塑料, 2011, 40(1): 114-117.
YANG Jia-li, LIU He-sheng, HUANG Xing-yuan, et al. Applications of Polyflow inverse extrusion method in the design of T shapedplastics profile extrusion die［J］. Plastics, 2011, 40(1):114-117. (in Chinese)
［12］ 任务正，王泽山. 火炸药理论与实践［M］. 北京: 中国北方化学 工业总公司, 2001: 808-814.
REN Wu-zheng, WANG Ze-shan. Theory and practice of explosives and propellants［M］. Beijing: North China Chemical Industry Corp, 2001: 808-814.(in Chinese)
［13］ Ladin D. Study of the rheological properties of polymer/gas solutions based on a foam extrusion［D］. Toronto: University of Toronto, 1999.
{{custom_fnGroup.title_cn}}
脚注
{{custom_fn.content}}
