用铜柱法同时测弹丸运动最大加速度和弹底 最大压カ的方案

潘学文

兵工学报 ›› 1992, Vol. 13 ›› Issue (3) : 85-87.

兵工学报 ›› 1992, Vol. 13 ›› Issue (3) : 85-87. DOI: 10.3969/j.issn.1000-1093.1992.03.014
研究简报

用铜柱法同时测弹丸运动最大加速度和弹底 最大压カ的方案

  • 潘学文
作者信息 +

Simultaneous Measurement of Maximum Accderation during Flight and Maximum Thrust Pressure on a Projectile Using the Crusher Gauge

  • Pan Xuewen
Author information +
文章历史 +

摘要

介绍一种用测压铜柱同时测弹丸运动最大加速度和弹底最大压力的测压装置方案及其有关的计算方法。同时讨论了利用所测数据求阻力系数φ1的方法。

Abstract

The paper describes a crusher gauge for the simultaneous measurement of the maximum amount of acceleration in a projectilemovement and the maximum pressure exerted on the projectile. Methods used in the evaluation of experimental data are given and the derivation of the resistance factor φ1 from the measurements is discussed.

关键词

弹底压力 / 测压铜柱 / 测压器

Key words

pressure at shot / copper cylinder / crusher gauge

引用本文

导出引用
潘学文. 用铜柱法同时测弹丸运动最大加速度和弹底 最大压カ的方案. 兵工学报. 1992, 13(3): 85-87 https://doi.org/10.3969/j.issn.1000-1093.1992.03.014
Pan Xuewen. Simultaneous Measurement of Maximum Accderation during Flight and Maximum Thrust Pressure on a Projectile Using the Crusher Gauge. Acta Armamentarii. 1992, 13(3): 85-87 https://doi.org/10.3969/j.issn.1000-1093.1992.03.014

参考文献

[1] 华东工程学院103教研室.内弹道学.国防工业出版社,1978: 125?126, 145?146

164

Accesses

0

Citation

Detail

段落导航
相关文章

/