潜载导弹水下弹射筒口气泡数理模型

刘浩天;傅德彬;毕凤阳;杨华伟;卢丙举

兵工学报 ›› 2022, Vol. 43 ›› Issue (3) : 599-604.

兵工学报 ›› 2022, Vol. 43 ›› Issue (3) : 599-604. DOI: 10.12382/bgxb.2021.0089
论文

潜载导弹水下弹射筒口气泡数理模型

  • 刘浩天1, 傅德彬1, 毕凤阳2,3, 杨华伟2,3, 卢丙举2,3
作者信息 +

Mathematical Model of Gas Bubble around the Outlet of Underwater Ejection Canister for Submarine-launched Missile

  • LIU Haotian1, FU Debin1, BI Fengyang2,3, YANG Huawei2,3, LU Bingju2,3
Author information +
文章历史 +

摘要

潜载导弹水下弹射产生的筒口气泡载荷对水下发射安全有着重要影响。围绕潜载导弹水下弹射筒口气泡膨胀降压和收缩增压的物理机制,建立筒口气泡载荷发展变化的数理模型,为气泡载荷特性分析提供有效途径。数理模型利用不可压缩势流模型描述水环境在气泡作用下的流动状态,采用包含筒内外工质气体的均压模型描述气泡压强变化,并采用直接边界元法进行求解计算。结合弹射实验数据和计算流体力学仿真结果的对比分析表明,数理模型可有效反映水下弹射弹体离筒初期筒口气泡的发展演变过程,能够用于筒口气泡载荷特性的预估和分析。

Abstract

The gas bubble around the outlet of underwater ejection canister for submarine-launched missile significantly affects the launching safety of missile. Based on the physical mechanisms of expansion-induced depressurization and contraction-induced pressurization of gas bubble,a mathematical model of gas bubble evolution is proposed to analyze the characteristics of bubble loading. The water flow fields are simulated by an incompressible potential flow model and solved by the direct boundary element method. The gas flow fields are calculated by an uniform pressure model. The gas bubble model is validated by comparing with experimental data and numerically simulated results. It is shown that the proposed model can be used to predict the load status of gas bubble for the early stage of missile leaving the launch canister.

关键词

潜载导弹 / 水下弹射 / 筒口气泡 / 数理模型 / 边界元法

Key words

submarine-launchedmissile / underwaterejection / outletgasbubble / mathematicalmodel / boundaryelementmethod

引用本文

导出引用
刘浩天, 傅德彬, 毕凤阳, 杨华伟, 卢丙举. 潜载导弹水下弹射筒口气泡数理模型. 兵工学报. 2022, 43(3): 599-604 https://doi.org/10.12382/bgxb.2021.0089
LIU Haotian, FU Debin, BI Fengyang, YANG Huawei, LU Bingju. Mathematical Model of Gas Bubble around the Outlet of Underwater Ejection Canister for Submarine-launched Missile. Acta Armamentarii. 2022, 43(3): 599-604 https://doi.org/10.12382/bgxb.2021.0089

基金

装备预先研究领域基金重点项目(JZX7Y20190247021201)

参考文献


[1]王汉平,余文辉,魏建峰.潜射模拟弹筒口压力场仿真[J].兵工学报,2009,30(8):1009-1013.
WANG H P,YU W H,WEI J F.Simulation of pressure field near canister outlet for underwater-launched emulated missile[J].Acta Armamentarii,2009,30(8):1009-1013.(in Chinese)
[2]李智生,赵欣,王红萍.筒口气泡对发射筒盖影响数值计算与分析[J].舰船电子工程,2018,38(5):154-158.
LI Z S,ZHAO X,WANG H P.Numerical calculation and analysis for the impact of outlet cavity on launch tube cover[J].Ship Electronic Engineering,2018,38(5):154-158.(in Chinese)
[3]闵景新,魏英杰,王聪,等.潜射导弹垂直发射过程流体动力特性数值模拟[J].兵工学报,2010,31(10):1303-1309.
MIN J X,WEI Y J,WANG C,et al.Numerical simulation on hydrodynamic characteristics of submarine missile in the vertical launch process[J].Acta Armamentarii,2010,31(10):1303-1309.(in Chinese)
[4]WEILANDC J,VLACHOSP P,YAGLA J J.Concept analysis and laboratory observations on a water piercing missile launcher[J]. Ocean Engineering,2010,37(11/12): 959-965.
[5]祁晓斌,王瑞,袁绪龙,等.水下垂直发射燃气后效对筒盖系统的影响研究[J].兵工学报,2017,38(11):2184-2189.
QI X B,WANG R,YUAN X L,et al.Research on the gas afterefect and its on launch tube cover during underwater vertical launching[J].Acta Armamentarii,2017,38(11):2184-2189.(in Chinese)
[6]侯金瑛,谭大成,毕世华,等.同心筒发射潜载导弹过程数值研究[J].固体火箭技术,2011,34(1):9-13.
HOU J Y,TAN D C,BI S H,et al.Numerical research on the process of launching submarine missile by concentric canister launcher[J].Journal of Solid Rocket Technology,2011,34(1):9-13. (in Chinese)
[7]张正,李冬,张木,等.筒口流场及其对发动机水下点火影响的数值模拟[J].导弹与航天运载技术,2016(5):80-86.
ZHANG Z,LI D,ZHANG M,et al.Numerical investigation to outlet flow field and its impact on underwater ignition of rocket engine[J].Missiles and Space Vehicles,2016(5):80-86. (in Chinese)
[8]权晓波,燕国军,李岩,等.水下航行体垂直发射尾空泡生成演化过程三维数值研究[J].船舶力学,2014,18(7): 739-745.
QUAN X B,YAN G J,LI Y,et al.Three-dimensional numerical study on the evolution process of tail bubble of underwater vehicle vertical launching[J].Journal of Ship Mechanics,2014,18(7):739-745. (in Chinese)
[9]邱海强,袁绪龙,王亚东,等.潜射导弹筒口气泡发展规律研究[J].兵工学报,2014,35(9):1510-1514.
QIU H Q,YUAN X L,WANG Y D,et al.Research on the law of development of outlet cavity during the launch of submarine launched missile[J].Acta Armamentarii,2014,35(9):1510-1514. (in Chinese)
[10]胡晓磊,乐贵高,马大为,等.水下燃气-蒸汽弹射气-液两相流场数值研究[J].航空动力学报,2015,30(1):164-172.
HU X L,LE G G,MA D W,et al.Numerical study of gas-steam ejection gas-liquid two-phase flow field under water[J] Journal of Aerospace Power,2015,30(1):164-172.(in Chinese)
[11]张晓乐,卢丙举,胡仁海,等.水下航行体垂直发射筒口压力场L/E耦合数值模拟[J].舰船科学技术,2016,38(11):151-155.
ZHANG X L,LU B J,HU R H,et al.L/E coupling numerical simulation of pressure field near launch canister outlet for underwater vehicle vertical launch[J].Ship Science and Technology,2016,38(11):151-155.(in Chinese)
[12]毕凤阳,卢丙举,赵世平,等.水下齐射扰动特性[J].航空动力学报,2020,35(7):1345-1352.
BI F Y,LU B J,ZHAO S P,et al.Disturbance characteristic of underwater salvo[J].Journal of Aerospace Power,2020,35(7):1345-1352.(in Chinese)
[13]武雨嫣.潜射航行体齐射出筒过程流场特性分析[D].哈尔滨:哈尔滨工业大学,2020:41-52.
WU Y Y.Analysis of flow field characteristics of submarine launched vehicle during launching out of cylinder[D].Harbin:Harbin Institute of Technology,2020:41-52.(in Chinese)
[14]黄建春,叶取源,朱世权.不同发射深度下导弹水下点火气水流体动力计算[J].应用力学学报,1994,1(3):19-24.
HUANG J C,YE Q Y,ZHU S Q.Gas-water dynamic calculation for the underwater ignition of a missile at different depths[J].Chinese Journal of Applied Mechanics,1994,11(3):19-24. (in Chinese)
[15]张有为,王晓宏.导弹尾部外形对发动机水下点火推力的影响[J].航空动力学报,2008,23(5):927-931.
ZHANG Y W,WANG X H.Influence of outline of missile tail on the thrust of solid motor launching under water[J].Journal of Aerospace Power,2008,23(5):927-931.(in Chinese)
[16]张有为,王晓宏.导弹水下点火推力峰值问题的数值研究[J].应用力学学报,2007,24(1):298-301.
ZHANG Y W,WANG X H.Numerical reasearch on thrust peak for underwater missile launching[J].Chinese Journal of Applied Mechanics,2007,24(1):298-301.(in Chinese)
[17]刘云龙,张阿漫,王诗平,等.基于边界元法的气泡同波浪相互作用研究[J].物理学报,2012,61(22):263-270.
LIU Y L,ZHANG A M,WANG S P,et al. Research on interaction between bubble and surface waves based on BEM[J].Acta Physica Sinica,2012,61(22):263-270.(in Chinese)
[18]MAG H,CHEN F,YU J Y,et al.Numerical investigation of trajectory and attitude robustness of an underwater vehicle considering the uncertainty of platform velocity and yaw angle[J].Journal of Fluids Engineering,2018,141(2):021106.
[19]CHENG Y S,LIU H.A coupling model of water flows and gas flows in exhausted gas bubble on missile launched underwater[J].Journal of Hydrodynamics,2007,19(4):403-411.
[20]倪宝玉,张阿漫,张忠宇,等.复杂流场下气泡界面不稳定现象的数值模拟方法综述[J].船舶力学,2014,18(4):470-483.
NI B Y,ZHANG A M,ZHANG Z Y,et al. Review on the numerical simulation methods of the instability of bubble interface under complex flow field[J].Journal of Ship Mechanics,2014,18(4): 470-483.(in Chinese)


Accesses

Citation

Detail

段落导航
相关文章

/