针对目前许多军工仪器红外成像系统的结构简单、体积小、质量轻的无热化设计要求，采用光学被动式方法对8 m~12 m波段、相对孔径为1的红外光学系统进行了无热化设计。具体光学系统参数：F=1，f=60 mm，2=11.4。设计结果：在-40℃~60℃工作范围内，该系统的调制传递函数（MTF）接近衍射极限，空间分辨率在20 lp/mm处，中心视场传函接近0.7，边缘视场传函大于0.6。其设计结果满足系统的无热化设计要求。
Abstract
Aiming at the athermal design requirements of infrared imaging systems for defense application such as simple structure, small size and light weight, this paper proposed an infrared optical system (8 m~12 m) with passive optical athermalization design. The parameters of the optical system was F=1，f=60 mm and 2=11.4.The analysis of results showed that the modulation transfer function (MTF) approached to the diffraction limit, the MTF was up to 0.7 in the central field of view(FOV) and better than 0.6 in the marginal FOV at the spatial frequency of 20 lp/mm in the temperature range of -40℃to +60℃. The results meet the athermalization requirements of the system.
关键词
光学被动式无热化设计 /
大相对孔径 /
红外光学系统 /
无热化
{{custom_keyword}} /
Key words
athermalization /
passive optical athermalization /
large relative aperture /
infrared optical system
{{custom_keyword}} /
{{custom_sec.title}}
{{custom_sec.title}}
{{custom_sec.content}}
参考文献
[1]王学新,焦明印.红外光学系统无热化设计研究[J].应用光学,2009,30(1):129-131.
WANG Xue-xin, JIAO Ming-yin. Athermalization design for infrared optical system[J].Journal of Applied Optics,2009,30(1):129-131.(in Chinese with an English abstract)
[2]POVEY V. Athermalisation techniques in infrared systems [J]. SPIE, 1986, 655:142-153.
[3]HUDYMA R M. Athermal MWIR objectives[J]. SPIE, 1995, 2540:229-235.
[4]UCAR A, KABAK M. Optical design of a broadband athermal infrared imager [J].SPIE, 2010, 7660:766029-1-766029-7.
[5]杨新军,王肇圻,母国光,等.红外双波段消热差光学系统设计[J].光电子·激光，2004,15(4)：385-389.
YANG Xin-jun, WANG Zhao-qi,MU Guo-guang, et al. Design of infrared dual-band athermal optical system[J]. J.Optoeletronics·Laser, 2004,15(4)：385-389.(in Chinese with an English abstract)
[6]胡玉禧,周绍祥,相里斌.消热差光学系统设计[J].光
{{custom_fnGroup.title_cn}}
脚注
{{custom_fn.content}}
