在对某型Q-MEMS(石英音叉陀螺)进行大量高低温环境试验的基础上，根据试验数据，建立了一种基于陀螺工作时间的零偏温度补偿模型，并用该模型对新测的试验数据进行了预测补偿。补偿结果表明：Q-MEMS陀螺经该模型补偿后可以将零偏减小至少一个数量级，并进一步提高了零偏稳定性，有效补偿了陀螺上电后的启动漂移，完全满足工程上的实时补偿要求。因此，该模型具有很强的工程实用价值。
Abstract
Based on a lot of temperature experiments of Q-MEMS gyro, a novel temperature compensation model based on operation time is established according to the experiment data. The compensation prediction is performed to the new experimental data, and the results of compensations show that the bias is reduced to at least one tenth of the original. And the bias stability is also enhanced. The model can meet the requirement of realtime compensation and can be used in the application of Q-MEMS gyro.
关键词
零偏 /
温度补偿 /
石英音叉陀螺
{{custom_keyword}} /
Key words
Q-MEMS gyro /
bias /
temperature compensation
{{custom_keyword}} /
{{custom_sec.title}}
{{custom_sec.title}}
{{custom_sec.content}}
参考文献
[1]杨培根, 龚智炳. 光电惯性技术[M].北京:兵器工业出版社,1999:195-199.
YANG Pei-gen, GONG Zhi-bing. Photoelectricity inertial technology[M].Beijing: Ordnance Industry Press,1999:195-199. (in Chinese)
[2]郭栓运, 梁庆仟, 袁晓莹. 寻北仪系统光线陀螺误差建模技术研究[J]. 应用光学,2007,28(8):101-104.
GUO Shuan-yun, LIANG Qing-qian, YUAN Xiao-ying. Modeling technology of fiber gyroscope error for north finding system[J]. Journal of Applied Optics,2007,28(8):101-104. (in Chinese with an English abstract)
[3]赵小宁,李县洛,雷宝权.激光陀螺零偏温度补偿研究[J].中国惯性技术学报, 2004,12(3):55-57.
ZHAO Xiao-ning, LI Xian-luo, LEI Bao-quan. Temperature compensation for ring laser gyro[J]. Journal of Chinese Inertial Technology, 2004,12(3):55-57. (in Chinese with an English abstract)
[4]徐丽娜,邓正隆,张广莹.陀螺仪温度试验与建模研究[J].宇航学
{{custom_fnGroup.title_cn}}
脚注
{{custom_fn.content}}
