车载周视观瞄平台异轴同步及任意距离修正问题分析及程序实现

曹晖;彭富伦;王虎;梁红军;徐姣杰;严宁

应用光学 ›› 2009, Vol. 30 ›› Issue (4) : 567-574.

应用光学 ›› 2009, Vol. 30 ›› Issue (4) : 567-574.

车载周视观瞄平台异轴同步及任意距离修正问题分析及程序实现

  • 曹晖1, 彭富伦2, 王虎2, 梁红军3, 徐姣杰2, 严宁2
作者信息 +

Correction of different-axis synchronization and arbitrary distance for vehicle panoramic sight platform

  • CAO Hui1, PENG Fu-lun2, WANG Hu2, LIANG Hong-jun3, XU Jiao-jie2, YAN Ning2
Author information +
文章历史 +

摘要

针对车载周视观瞄平台异轴同步性问题采用几何作图法进行分析,得到异轴同步问题产生的根源是不同光电平台转动过程中由于存在偏差角所致,对校准距离情况下的角偏差,距离小于校准距离情况下的视差和距离大于校准距离情况下的角偏差在3中不同区间的修正方法进行分析并进行等效近似,给出程序实现方法,最后用实验验证了此方法的正确性。

Abstract

The root-cause for the synchronous error of multiple axes of the vehicle panoramic sight platform was found after analysis with the geometric method. Since the synchronous error is caused by the windage angle produced in the working process of the optoelectronic platform, the method to correct the angular deviation at any distance is proposed. The experiment for solving the problem was implemented. The experiment indicates that the method is valid.

关键词

异轴同步 / 任意距离修正 / 周视观瞄平台

Key words

panoramic sight platform / correction at arbitrary distance / synchronization of different axes

引用本文

导出引用
曹晖, 彭富伦, 王虎, 梁红军, 徐姣杰, 严宁. 车载周视观瞄平台异轴同步及任意距离修正问题分析及程序实现. 应用光学. 2009, 30(4): 567-574
CAO Hui, PENG Fu-lun, WANG Hu, LIANG Hong-jun, XU Jiao-jie, YAN Ning. Correction of different-axis synchronization and arbitrary distance for vehicle panoramic sight platform. Journal of Applied Optics. 2009, 30(4): 567-574

参考文献

[1]戴炳明,任宏岩.周视瞄准镜的光电测角系统[J]. 光电子·激光,1996,7(1):30-32.
DAI Bin-ming, REN Hong-yan. An opto-electronic automatic measuring angle system which the panoramic sight[J].Journal of Optoelectronics Laser, 1996,7(1):30-32.(in Chinese with an English abstract)
[2]陈文建.车载光电对抗平台计算机系统的工程化设计[J].2007,应用光学,28(增刊):28-32.
CHEN Wen-jian.DSP-based close-coupled master-slave navigation computer for AOWS[J].Journal of Applied Optics,2007,28(sup.):28-32. (in Chinese with an English abstract)

Accesses

Citation

Detail

段落导航
相关文章

/