变焦系统凸轮曲线的优化设计

陈鑫;付跃刚

应用光学 ›› 2008, Vol. 29 ›› Issue (1) : 45-47.

应用光学 ›› 2008, Vol. 29 ›› Issue (1) : 45-47.

变焦系统凸轮曲线的优化设计

  • 陈鑫,付跃刚
作者信息 +

Optimal design of cam curve for zoom system

  • CHEN Xin,FU Yue-gang
Author information +
文章历史 +

摘要

由于变焦系统凸轮曲线的的质量直接影响像质,因此从实际应用出发,以变焦方程和动态光学原理为依据,结合实际工作中需要设计的变焦镜头,通过对变焦系统高斯计算的过程进行分析,指出影响凸轮曲线的主要因素为变倍组和补偿组的焦距以及二者的间隔。针对3个参量之间的对应关系进行讨论,提出了优化凸轮曲线的方法。

Abstract

Based on the zoom equation, the dynamic optics principle and the process analysis of the Gauss calculation for zoom systems, it is pointed out that the primary factors which influence the cam curve are the focal length of the zoom lens group and compensating lens group, and the distance between them. The relationships between the three parameters were discussed. The method to optimize the cam curve is proposed.

关键词

凸轮曲线 / 光学设计 / 优化设计 / 变焦距系统

Key words

optical design / zoom system / cam curve / optimal design

引用本文

导出引用
陈鑫, 付跃刚. 变焦系统凸轮曲线的优化设计. 应用光学. 2008, 29(1): 45-47
CHEN Xin, FU Yue-gang. Optimal design of cam curve for zoom system. Journal of Applied Optics. 2008, 29(1): 45-47

11

Accesses

0

Citation

Detail

段落导航
相关文章

/