光纤光栅(FBG)传感器具有灵敏度高，测量量程大，抗电磁干扰能力强，耐高温能力强等诸多优点，在爆炸冲击测试领域具有广泛的应用前景。针对空腔爆炸压力变化历程对压力传感器的性能要求，设计了一种抗冲击FBG压力传感器。传感器采用圆平膜片作为承压面，利用均匀压力作用下的挠度拉伸FBG产生位移。对传感器的力学模型进行了理论计算，并进行了有限元仿真，理论分析与数值模拟计算结果误差小于2%。使用标准压力源对传感器进行了标定，获得最终的压力灵敏度为545.187 kPa/nm，线性度相关度为99.998%。根据空腔爆炸现场防护需求，设计了有效的抗爆防护装置，并将该传感器成功用于空腔爆炸爆后气体压力变化历程测量，取得很好的测试效果。
Abstract
The fiber Bragg grating(FBG) sensor has extensive application prospects in the field of explosion impact testing for its merits like high sensitivity, wide measurement range, anti-electromagnetic interference capability, high temperature resistance and so on. An anti-impact FBG pressure sensor was designed for the performance requirements of pressure sensor in the process of cavity explosion pressure change. The sensor used a flat diaphragm as the bearing surface, and used the deflection under uniform pressure to stretch the FBG so as to generate displacement. The mechanical model of the sensor was theoretically calculated and the finite element simulation was carried out. Result shows that the error between theoretical analysis and numerical simulation is less than 2%. And the sensor was calibrated using a standard pressure source with a final pressure sensitivity of 545.187 kPa/nm and a linearity correlation of 99.998%. In addition, according to the protection requirements of the cavity explosion site, an effective anti-explosion protection device was designed, and the sensor was successfully used for the measurement of gas pressure change history after cavity explosion, which achieved good test results.
关键词
圆平膜片 /
空腔爆炸 /
防护装置 /
压力变化历程 /
压力传感器
{{custom_keyword}} /
Key words
Key words: pressure sensor /
circular flat diaphragm /
pressure changing progress /
cavity explosion /
protective device
{{custom_keyword}} /
{{custom_sec.title}}
{{custom_sec.title}}
{{custom_sec.content}}
参考文献
由泽伟, 王源, 孙阳阳, 等.光纤光栅传感器在爆炸冲击测量中的应用[J].压电与声光, 2017, 39(4): 614-618.
褚晓慧, 张敏, 周宏朴, 等.一种光纤布喇格光栅压力传感器的设计及实验[J].光子学报, 2009, 38(11): 2785-2788.
冉新涛, 马少平, 李西柳, 等.光纤光栅压力传感器的理论建模及实验研究[J].应用光学, 2014, 35 (5): 873-879.
王丽丽, 忻向军, 郝金光.基于光纤光栅的结构体裂缝三维应变传感[J].光子学报, 2016, 45(12): 1-5.
梁晨, 刘爱春, 范良龙, 等.基于FBG的钻孔应变传感器研制[J].光电子·激光, 2017, 28(10): 1054-1060.
冯艳, 张劲, 张震, 等.灵敏度可调的光纤布喇格光栅称量传感单元[J].光子学报, 2017, 46(10): 1006001.
郭红英, 王召巴.基于光纤光栅的高压固化压力传感器研究[J].分析化学, 2017, 45(7): 980-986.
余尚江, 陈显, 杨吉祥.冲击荷载下基于埋入式光纤光栅传感器的混凝土动态应变测
YOU Zewei, WANG Yuan, SUN Yangyang, et al. Application of fiber Bragg grating sensor to the explosion and impact measurement[J]. Piezoelectectrics & Acoustooptics, 2017, 39(4): 614-618.
XU M G, REEKIE L, CHOW Y T, et al. Optical in-fiber grating high pressure sensor[J]. Electronics Letters, 1993, 29(4):398-399.
CUSANO A, CUTOLO A, NASSER J, et al. Dynamic strain measurements by fiber Bragg grating sensor[J]. Sensors and Actuators A: Physical, 2004, 110(1/2/3):276-281.
CHU Xiaohui, ZHANG Min, ZHOU Hongpu, et al. Design and experiment of fiber bragg grating pressure sensor[J]. Acta Photonica Sinica, 2009, 38(11): 2785-2788.
RAN Xintao, MA Shaoping, LI Xiliu, et al. Theoretical modeling and experimental study on optical fiber grating pressure sensor[J]. Journal of Applied Optics, 2014, 35 (5): 873-879.
WANG Lili, XIN Xiangjun, HAO Jinguang. Mechanism of three-dimension sensing with fiber grating for structure cracks detection[J]. Acta Photonica Sinica, 2016, 45(12):1-5.
LIANG Chen, LI
{{custom_fnGroup.title_cn}}
脚注
{{custom_fn.content}}
