大口径铝合金主反射镜设计与分析

李全超;李蕾;谭淞年;张洪伟

应用光学 ›› 2016, Vol. 37 ›› Issue (3) : 337-341.

应用光学 ›› 2016, Vol. 37 ›› Issue (3) : 337-341. DOI: 10.5768/JAO201637.0301003

大口径铝合金主反射镜设计与分析

  • 李全超,李蕾,谭淞年,张洪伟
作者信息 +

Design and analysis for large aperture primary aluminum mirrors

  • Li Quanchao,Li Lei,Tan Songnian,Zhang Hongwei
Author information +
文章历史 +

摘要

针对铝合金材料,设计了大口径红外相机主反射镜,反射镜口径420 mm。以径厚比、支撑点数量和轻量化结构形式为输入点,设计了一种背部开放式、三角形轻量化结构和背部3点支撑的结构形式。通过有限元分析软件对反射镜的动态刚度及自重和温度载荷下的面形变化进行了分析。分析结果表明:反射镜具有高的动态刚度,反射镜自重工况和-40 ℃均匀温降下,面形精度RMS分别为30 nm和0.2 nm,均满足光学设计提出的/10(=632.8 nm)指标要求,为大口径铝合金反射镜的设计提供了理论依据。

Abstract

Aiming at the aluminum alloy material,a largeaperture primary mirror of infrared camera was designed with the mirror aperture of 420 mm. Starting from the diameterthickness ratio, the number of the support points and the lightweight structural form, a structure of open back, triangle lightweight construction and back threepoint support was designed. Dynamic stiffness of the mirror and surface shape change under the weight and temperature loads were analyzed by the finite analysis software. The results show that the natural frequency of the mirror is enough, which has a sufficiently high dynamic stiffness. Both surface accuracy RMS of the mirror(30 nm,0.2 nm) have reached the index requirements of the optical system(/10,=632.8 nm) under gravity and a uniform temperature drop of -40℃,which provides a theoretical basis for the design of infrared aluminum mirror.

关键词

铝合金反射镜 / 大口径 / 轻量化 / 有限元分析 / 红外相机

Key words

infrared camera / aluminum mirrors / lightweight / finite element analysis / large aperture

引用本文

导出引用
李全超, 李蕾, 谭淞年, 张洪伟. 大口径铝合金主反射镜设计与分析. 应用光学. 2016, 37(3): 337-341 https://doi.org/10.5768/JAO201637.0301003
Li Quanchao, Li Lei, Tan Songnian, Zhang Hongwei. Design and analysis for large aperture primary aluminum mirrors. Journal of Applied Optics. 2016, 37(3): 337-341 https://doi.org/10.5768/JAO201637.0301003

基金

国家自然科学基金青年科学基金项目(61405192);中国科学院国防科技创新基金项目(CXJJ15S158)

参考文献

[1]Yan Yong,Jin Guang,Yang Hongbo. Lightweight structural design of space mirror[J].Infrared and Laser Engineering,2008,37(1):97-101.
闫勇,金光,杨洪波.空间反射镜结构轻量化设计[J].红外与激光工程,2008,37(1):97-101.
[2]Cui Yongpeng,He Xin,Zhang Kai. Characteristic analysis of reflectors material used by space camera[J].Laser & Infrared,2010,40(4):418-421.
崔永鹏,何欣,张凯.某空间用主反射镜的设计[J].激光与红外,2010,40(4):418-421.
[3]Zhang Dongge,Fu Yutian. Development and application of aluminum mirrors in optical system[J].Infrared Technology,2015,37(10):814-823.
张东阁,傅雨田.铝合金反射镜的发展和应用[J].红外技术,2015,37(10):814-823.
[4]Gong Yan,Zhao Lei.Sing point diamond machines and applications to optical engineering[J].Chinese Optics,2011,4(6):537-545.
巩岩,赵磊.单点金刚石机床及其在光学工

17

Accesses

0

Citation

Detail

段落导航
相关文章

/