视轴角控制误差对航天相机成像质量的影响分析

王战;韩诚山;李祥之;黄良;姚程

应用光学 ›› 2015, Vol. 36 ›› Issue (1) : 35-40.

应用光学 ›› 2015, Vol. 36 ›› Issue (1) : 35-40. DOI: 10.5768/JAO201536.0101007

视轴角控制误差对航天相机成像质量的影响分析

  • 王战1,2, 韩诚山1, 李祥之1, 黄良1, 姚程1,2
作者信息 +

Effect of control error of boresight angle on imaging quality of space camera

  • Wang Zhan1,2, Han Cheng-shan1, Li Xiang-zhi1, Huang Liang1, Yao Chen1,2
Author information +
文章历史 +

摘要

为了降低飞行器倾斜成像工作过程中视轴角误差对TDICCD空间相机成像质量的影响,提出满足相机成像质量的视轴角范围及控制误差的要求。根据空间相机成像机理,给出了焦面像移速度以及由视轴角误差引起的像移速度匹配误差计算公式,分析了视轴角对地面像元分辨力的影响。并以调制传递函数(MTF)为约束条件给出了不同积分级数下视轴角的范围。通过实际工程参数计算得出,当视轴角控制误差为0.8时,满足96级TDICCD成像质量要求的视轴角应不大于12.75;若要满足96级TDICCD倾斜成像时视轴角达到25,则视轴角控制误差应优于0.4。

Abstract

In order to reduce the influence of boresight angle error on the image quality of the time delay integration charge couple device (TDICCD) space camera during the tilted imaging process, the requirements for the scopes of boresight angle and its control errors were put forward to meet the image quality of space camera. According to the imaging mechanism of space camera, the calculation formula of focal plane image motion speed and that of the matching error of image motion speed caused by boresight angle error were presented, and the effect of boresight angle on the ground pixel resolution was analyzed. Moreover,the ranges of boresight angles for different integration degrees were given under the constraints of modulation transfer function (MTF). From practical calculations, it is concluded that, when the control error of boresight angle is 0.8, the boresight angle should be less than 12.75or if the boresight angle needs to reach 25, the control error should be less than 0.4to satisfy the quality requirements of TDICCD of which the integration degree is 96.

关键词

视轴角 / 调制传递函数 / 像移速度 / 姿态控制 / 空间相机

Key words

space camera / boresight angle / modulation transfer function / image motion speed / attitude control

引用本文

导出引用
王战, 韩诚山, 李祥之, 黄良, 姚程. 视轴角控制误差对航天相机成像质量的影响分析. 应用光学. 2015, 36(1): 35-40 https://doi.org/10.5768/JAO201536.0101007
Wang Zhan, Han Cheng-shan, Li Xiang-zhi, Huang Liang, Yao Chen. Effect of control error of boresight angle on imaging quality of space camera. Journal of Applied Optics. 2015, 36(1): 35-40 https://doi.org/10.5768/JAO201536.0101007

基金

国家自然科学基金(60506014)

参考文献

[1]Tong Shoufeng, Li Dezhi, Hao Zhihang. Analysis on the characteristics of TDI-CCD high-resolution camera for remote sensing [J]. Opto-Electronic Engineering, 2001, 28(4): 64-67.
佟首峰,李德志,郝志航. 高分辨率TDI-CCD遥感相机的特性分析[J]. 光电工程,2001,28(4):64-67.
[2]Wang Wanting, Guo Jin, Jiang Zhenhua, et al. Study of image quality degrade by LOS jitter [J]. Chinese Journal of Lasers, 2014, 41(4): 0409001-1-9.
王碗婷,郭劲,姜振华,等. 视轴抖动对成像质量影响的研究[J]. 中国激光,2014,41(4): 0409001-1-9.
[3]Yan Dejie, Han Chengshan, Li Weixiong. Optimization design of scroll and pitch and their control errors on aerocraft [J]. Optics and Precision Engineering, 2009, 17(9): 2224-2229.
闫得杰,韩诚山,李伟雄. 飞行器侧摆各前后摆及控制误差的优化设计[J]. 光学精密工程,2009,17(9):2224-2229.
[4]Fan Chao, Li Yingcai, Fu Hongliang, et al. Robustness study of motion d

13

Accesses

0

Citation

Detail

段落导航
相关文章

/