PBX模拟炸药的动态力学行为及损伤本构研究

肖有才，洪志雄，蒋海燕，王志军，熊言义，张 宏

火炸药学报 ›› 2022, Vol. 45 ›› Issue (3) : 339-347.

PDF(8474 KB)
EN 投稿 期刊 文章 图表 检索
高级检索

  • 主管：中国科学技术协会

    主编：魏 卫

    ISSN 1007-7812

    　

  • 主办：中国兵工学会与中国兵器工业第204研究所共同

    出版：《火炸药学报》 编辑部

    CN 61-1310/TJ

《火炸药学报》1978年创刊，国内外公开发行。是由中国科协主管、中国兵工学会与中国兵器工业第二〇四研究所共同主办的学术刊物, 是我国创刊最早的火炸药技术专业期刊。
PDF(8474 KB)
火炸药学报 ›› 2022, Vol. 45 ›› Issue (3) : 339-347. DOI: 10.14077/j.issn.1007-7812.202201002

PBX模拟炸药的动态力学行为及损伤本构研究

  • 肖有才1,洪志雄1,蒋海燕2,王志军1,熊言义3,张 宏3
作者信息 +

Research on Dynamic Mechanical Behavior and Damage Constitutive Model of PBX Substitute Material

  • XIAO You-cai1,HONG Zhi-xiong1,JIANG Hai-yan2, WANG Zhi-jun1,XIONG Yan-yi3,ZHANG Hong3
Author information +
文章历史 +

摘要

针对实验室开展某些弹药力学响应实验时存在的安全问题,制备了PBX模拟炸药并研究了其力学性能,获得了不同应变率下的力学响应过程,并与PBX9501进行了对比; 建立了PBS模拟炸药的广义黏弹性统计损伤本构模型(Vicso-SCRAM),利用有限元ABAQUS中VUMAT模块编写子程序,模拟了PBS模拟炸药的SHPB动态压缩实验,验证了所建立的损伤本构模型的有效性; 利用SEM扫描电镜观察了PBS加载前后的细观形貌。结果表明,PBS材料具有明显的应变率效应,且其静态/动态力学性能与压装PBX比较相似; PBS细观结构及损伤形貌与PBX较为相似,在准静态加载条件下PBS材料主要发生黏结剂脱粘,在动态加载条件下则以穿晶断裂为主。

Abstract

Aiming at the safety problems existing in some ammunition mechanical response experiments in the laboratory, PBX substitute material(PBS)was prepared and its mechanical behaviors were studied. The mechanical properties of the PBS were obtained under the different strain rates, which were compared with those of PBX9501. Viscoelastic statistical crack mechanics(Visco-SCRAM)was developed for the PBS. By using the VUMAT module of ABAQUS, the SHPB dynamic compression experiment of PBS was numerically studied, and the validity of the damage constitutive model was also verified. The microstructure of the PBS before and after loading were observed by SEM. The results show that the PBS has an obvious strain rate effect, and its static/dynamic mechanical properties are similar to that of pressed PBX. The microstructure and damage mode of the PBS were similar to that of the PBX. Under the quasi-static loading condition, interface debonding between the grain and polymer binder is the predominant failure mode. Under the dynamic loading condition, crystal cleavage is mainly damage mode.

关键词

材料力学 / 高聚物黏结炸药 / PBX模拟材料 / 应变率效应 / Visco-SCRAM / 细观损伤

Key words

material mechanics / polymer bonded explosive / PBX substitute material / strain rate effect / visco-SCRAM / microscopic damage

引用本文

EndNote

Ris (Procite)

Bibtex

导出引用
肖有才，洪志雄，蒋海燕，王志军，熊言义，张 宏. PBX模拟炸药的动态力学行为及损伤本构研究. 火炸药学报. 2022, 45(3): 339-347 https://doi.org/10.14077/j.issn.1007-7812.202201002
XIAO You-cai,HONG Zhi-xiong,JIANG Hai-yan, WANG Zhi-jun,XIONG Yan-yi,ZHANG Hong. Research on Dynamic Mechanical Behavior and Damage Constitutive Model of PBX Substitute Material. Chinese Journal of Explosives & Propellants. 2022, 45(3): 339-347 https://doi.org/10.14077/j.issn.1007-7812.202201002
中图分类号： TJ55    TQ564   

参考文献

[1] 王硕, 卢芳云, 陈荣. 约束PBX炸药中心点火反应烈度演化实验研究[J].火炸药学报, 2021,44(5):623-630.
WANG Shuo, LU Fang-yun, CHEN Rong. Experimental study on intensity evolution of central ignition reaction of confined PBX explosive[J]. Chinese Journal of Explosives & Propellants(Huozhayao Xuebao), 2021, 44(5):623-630.
[2]胡雪垚, 聂贻韬, 沈飞, 等. 考虑应变率及密度影响的含铝PBX炸药本构模型[J]. 火炸药学报, 2021, 44(5):631-636.
HU Xue-yao, NIE Yi-tao, SHEN Fei, et al. A constitutive model of aluminized PBX explosive considering the effects of strain rate and density[J]. Chinese Journal of Explosives & Propellants(Huozhayao Xuebao), 2021, 44(5):631-636.
[3]HANG Gui-yun, YU Wen-li, WANG Tao, et al. Comparative studies on structures, mechanical properties, sensitivity, stabilities and detonation performance of CL-20/TNT cocrystal and composite explosives by molecular dynamics simulation[J]. Journal of Molecular Modeling, 2017, 23(10): 1-9.
[4]XIAO You-cai, SUN Yi, ZHEN Yu-bao, et al. Characterization, modeling and simulation of the impact damage for polymer bonded explosives [J]. International Journal of Impact Engineering, 2017, 103: 149-58.
[5]FUNK D J, LAABS G W, PETERSON P D, et al. Measurement of the stress/strain response of energetic materials as a function of strain rate and temperature: PBX 9501 and mock 9501[C]∥Proceedings of the conference of the American Physical Society topical group on shock compression of condensed matter. [S.l.]:AIP Publishing, 1996: 145-148.
[6]CHEN Jian-kang, LI Ji-liang, ZHU Li-ming, et al. On the tension-induced microcracks' nucleation in a PBX substitute material under impact compression loading[J]. International Journal of Mechanical Sciences, 2017, 134: 263-272.
[7]蔡宣明, 张伟, 魏刚,等. PBX模拟材料动态力学响应及细观损伤模式[J]. 含能材料, 2014(5): 658-663.
CAI Xuan-ming, ZHANG Wei, WEI Gang. Dynamic mechanics response and mesoscopic damage of a PBX simulant[J]. Chinese Journal of Energetic Materials, 2014(5): 658-663.
[8]黄韬, 陈建康, 李克武,等. 气炮加载下PBXs替代材料中的应力波幅衰减特性[J]. 工程塑料应用, 2018, 46(5): 85-88.
HUANG Tao, CHEN Jian-kang, LI Ke-wu. Attenuation characteristics of stress amplitude in PBXs substitute materials under air gun loading[J]. Engineering Plastics Application, 2018,46(5): 85-88.
[9]RAVINDRAN S, TESSEMA A, KIDANE A J. Multiscale damage evolution in polymer bonded sugar under dynamic loading[J]. Mechanics of Materials, 2017, 114: 97-106.
[10]BENNETT J G, HABERMAN K S, JOHNSON J N, et al. A constitutive model for the non-shock ignition and mechanical response of high explosives[J]. Journal of the Mechanics and Physics of Solids, 1998, 46: 2303-2322.
[11]PALMER S, FIELD J E, HUNTLEY J J, Deformation, strengths and strains to failure of polymer bonded explosives[J]. Proceedings of the Royal Society of London. Series A: Mathematical and Physical Sciences, 1993: 440: 399-419.
[12]GRAY G, BLUMENTHAL W R. Split-Hopkinson Pressure Bar Testing of Soft Materials[M]. [S.l.]:ASM Handbook, 2000: 488-496.
[13]IDAR D, THOMPSON D, GRAY III G, et al. Influence of polymer molecular weight, temperature, and strain rate on the mechanical properties of PBX 9501[C]∥Aip conference proceedings. AIP Publishing, 2002: 821-824.
[14]GRAY III G, IDRA D, BLUMENTHAL W, et al. High-and low-strain rate compression properties of several energetic material composites as a function of strain rate and temperature[R]. New Mexico: Los Alamos National Lab, 1998.
[15]DAGLEY I J, HO S Y, MONTELLI L, et al. High strain rate impact ignition of RDX with ethylene-vinyl acetate(EVA)copolymers[J]. Combust Flame, 1992, 89(3/4): 271-285.
[16]BLUMENTHAL W, THOMPSON D, CADY C, et al. Compressive properties of PBXN-110 and its HTPB-based binder as a function of temperature and strain rate[C]∥12th International Detonation Symposium. 2002, 11-16.
[17]XIAO You-cai, SUN Yi, LI Xiao, et al. Dynamic mechanical behavior of PBX[J]. Propellants, Explosives, Pyrotechnics, 2016, 41: 629-636.
[18]BENNETT J G, HABERMAN K S, JOHNSON J N, et al. A constitutive model for the non-shock ignition and mechanical response of high explosives[J]. Journal of the Mechanics and Physics of Solids, 1998, 46: 2303-2322.
[19]DIENES J, ZUO Q, KERSHNER J J, et al. Impact initiation of explosives and propellants via statistical crack mechanics[J]. Journal of the Mechanics and Physics of Solids, 2006. 54: 1237-1275.
[20]RAE P, GOLDREIN H, PALMER S, et al. Quasi-static studies of the deformation and failure of β-HMX based polymer bonded explosives[C]∥Mathematical and Physical Sciences. London: the Royal Society of London, 2002, 458(2019): 743-62.
[21]李俊玲. PBX炸药装药的力学性能及损伤破坏研究[D]. 长沙:国防科学技术大学, 2012.
LI Jun-ling. Study on PBX's mechanical behavior and damage feature[D]. Changsha: National University of Defenses Technology, 2012.
[22]BENNETT J G, HABERMAN K S, JOHNSON J N, et al. A constitutive model for the non-shock ignition and mechanical response of high explosives[J]. Journal of the Mechanics and Physics of Solids, 1998, 46: 2303-2322.
[23]HACKETT R M, BENNETT J G. An implicit finite element material model for energetic particulate composite materials [J]. International Journal for Numerical Methods In Engineering, 2000, 49(9): 1191-1209.
[24]FREUND L B. The mechanics of dynamic fracture[M]∥Mechanics of Dynamic Fracture. Cambridge:[s.n.],1986.
[25]EVANS A J. Slow crack growth in brittle materials under dynamic loading conditions [J]. International Journal of Fracture, 1974, 10(2): 251-9.
[26]XIAO You-cai, SUN Yi, LI Xiao, et al. Dynamic compressive properties of polymer bonded explosives under confining pressure [J]. Propellants, Explosives, Pyrotechnics, 2017, 42(8): 873-882.
[27]XIAO You-cai, XIAO Xiang-dong, XIONG Yan-yi, et al. Mechanical behavior of a typical polymer bonded explosive under compressive loads [J]. Journal of Mechanical Science and Technology, 2017, 42(8): 873-882.
[27]XIAO You-cai, XIAO Xiang-dong, XIONG Yan-yi, et al. Mechanical behavior of a typical polymer bonded explosive under compressive loads [J]. 021,35(6): 1-33.
PDF(8474 KB)

14

Accesses

0

Citation

Detail
段落导航
相关文章

/

〈 〉