Test and Numerical Simulation for Annular and Linear Shaped Charge Projectiles Interfering the Penetrating Process of Long RodPenetrators

ZHANG Jin-hong;LI Ru-jiang;LIU Tian-sheng

Acta Armamentarii ›› 2018, Vol. 39 ›› Issue (7) : 1372-1378. DOI: 10.3969/j.issn.1000-1093.2018.07.015
Paper

Test and Numerical Simulation for Annular and Linear Shaped Charge Projectiles Interfering the Penetrating Process of Long RodPenetrators

  • ZHANG Jin-hong, LI Ru-jiang,LIU Tian-sheng
Author information +
History +

Abstract

A new explosive reactive armor based on the structure of annular shaped charge is designed to further improve the protective performance of explosive reactive armor and the survivability of tanks on the battlefield, which is used to intercept the high speed and large length-to-diameter ratio rod penetrators. The process of annular explosively formed projectile (EFP) interfering on the rod penetrators isnumerically simulated using the finite element software ANSYS/LS-DYNA, and both the process of annular EFP forming and the mechanism of interfering on the armor piercing projectile are analyzed. Under the same conditions, the processes of interfering on the rod penetrators by linear and annular EFPs are compared. The results shows that EFP with annular shaped charge has the higher defense performance. The effective penetration depth of long rod projectile is reduced by 32.5% compared to EFP with linear shaped charge, and the length of crater is increased by 10.4%. The long rod projectile is broken and yaws under the interference of annular EFP. The simulated results are in good agreement with the test results. Key

Key words

long-rodarmorpiercingshell / annularshapedcharge / annularexplosivelyformedprojectile / linearshapedcharge / numericalsimulation

Cite this article

Download Citations
ZHANG Jin-hong, LI Ru-jiang,LIU Tian-sheng. Test and Numerical Simulation for Annular and Linear Shaped Charge Projectiles Interfering the Penetrating Process of Long RodPenetrators. Acta Armamentarii. 2018, 39(7): 1372-1378 https://doi.org/10.3969/j.issn.1000-1093.2018.07.015

References



[1]王凤英. 装甲防护技术的发展[J]. 测试技术学报, 2002, 16(2): 145-147.
WANG Feng-ying. The development of armored protection techno- logy[J].Journal of Test and Measurement Technology, 2002, 16(2): 145-147.(in Chinese)
[2]崔宝元, 刘天生, 许文梅. 爆炸反应装甲主动防长杆穿甲弹技术新探究[J]. 机械管理开发, 2011(1):29-31.
CUI Bao-yuan, LIU Tian-sheng, XU Wen-mei. New technology exploration of explosive reactive armor defending long rod penetrators actively[J]. Mechanical Management and Development, 2011(1): 29-31. (in Chinese)
[3]白汉德. 现代坦克战的矛和盾[J]. 坦克装甲车辆, 2007(6):23-25.
BAI Han-de.The spear and shield of modern tank battle [J]. Tank & Armoured Vehicle, 2007(6):23-35. (in Chinese)
[4]GazonasG A, Segletes S B, Paxton C V, et al. Hydrocode simulation of flexilinear shaped charge jet penetration into an explosive filled cylinder[C]∥Proceedings of the 18th International Symposium on Ballistics. San Antonio, TX, US:International Ballistics Society, 1999:513-519.
[5]Chick M C, Bussell T J, Lam C P, et al.Development of a cookie-cutter explosively formed projectile[C]∥Proceedings of the 17th International Symposium on Ballistics. Midrand, South Africa: International Ballistics Society, 1998:25-27.
[6]Knig P J, Mostert F J. The design and performance of annular EFP's[C]∥Proceedings of the 19th Intemational Symposium of Ballistics. Interlaken, Switzerland: International Ballistics Society, 2001:749-754.
[7]Mcister J, Haller F. Experimental and numerical studies of annular projectile charges[C]∥Proceedings of the 19th International Symposium on Ballistics. Interlaken, Switzerland: International Ballistics Society, 2001:575-581.
[8]贾伟, 吴国东, 王志军, 等. 药型罩结构对环形爆炸成型弹丸形成的影响[J]. 爆破器材, 2011, 40(6):8-11.
JIA Wei, WU Guo-dong, WANG Zhi-jun, et al. Influence of liner structure on forming process of annular EFP [J]. Explosive Materials, 2011, 40(6):8-11. (in Chinese)
[9]傅磊, 王伟力, 黄雪峰, 等. 环型聚能装药侵彻靶板能力影响因素分析[J]. 海军航空工程学院学报, 2015, 30(2):151-155.
FU Lei, WANG Wei-li, HUANG Xue-feng, et al. Influencing factors analysis of annular shaped charge penetrating into plate [J]. Journal of Naval Aeronautical and Astronautical University, 2015, 30(2):151-155. (in Chinese)

[10]裴红波, 焦清介, 聂建新. 环形聚能装药水射流成型过程的数值研究[J]. 含能材料, 2013, 21(2):249-252.
PEI Hong-bo, JIAO Qing-jie, NIE Jian-xin, et al. Numerical study on water jet formation of semi-ring shaped charge[J]. Chinese Journal of Energetic Materials, 2013, 21(2):249-252. (in Chinese)
[11]McDonaldS. Modeling of liner shaped charge performance using LS-DYNA[C]∥Proceedings of the 50th Annual SAFE Sympo-sium.Reno, NV, US: Safe Association, 2012: 312-322.
[12]Weickert C A, Kimsey K D. Three-dimensional computer simulation of a liner self-forging gragment device[C]∥Proceedings of the 7th International Symposium on Ballistics. Hague, Netherlands: International Ballistics Society, 2011: 19-21.
[13]孙立志, 李治源, 吕庆敖. 四层剪切运动间隔靶板对射流干扰的数值模拟[J]. 高压物理学报, 2013, 27(3):423- 430.
SUN Li-zhi, LI Zhi-yuan, LYU Qing-ao. Simulation of four layer shear motion of space target on numerical jet interference[J].Chinese Journal of High Pressure Physics, 2013, 27(3):423-430. (in Chinese)
[14]张自强. 装甲防护技术基础.[M]. 北京:兵器工业出版社, 2000:44-46.
ZHANG Zi-qiang. Technological basis of armor protection [M]. Beijing:Publishing House of Ordnance Industry, 2000:44-46.(in Chinese)




第39卷第7期2018年7月兵工学报ACTA
ARMAMENTARIIVol.39No.7Jul. 2018

525

Accesses

0

Citation

Detail

Sections
Recommended

/