A Simulation Investigation on Grinding Forces in Ultrasonic Assisted Grinding of Ceramics with Single Abrasive Grain byUsing SPH Method
MI Zhao-yang，LIANG Zhi-qiang，WANG Xi-bin， ZHOU Tian-feng，ZHAO Wen-xiang， TIAN Meng
Author information+
(Key Laboratory of Fundamental Science for Advanced Machining, Beijing Institute of Technology, Beijing 100081, China)
{{custom_zuoZheDiZhi}}
{{custom_authorNodes}}
{{custom_bio.content}}
{{custom_bio.content}}
{{custom_authorNodes}}
Collapse
History+
Received
Revised
Published
2014-08-19
2014-08-19
2015-06-30
Issue Date
2015-08-03
Abstract
In order to investigate the influence of axial ultrasonic vibration on the grinding force during ultrasonic assisted grinding (UAG) of SiC and Al2O3 ceramics, the grinding forces of UAG SiC and Al2O3 ceramics with single diamond abrasive grain are simulated by using smoothed particle hydrodynamic (SPH) method. In the simulation，the average undeformed chip thickness is set as the depth of cut. It is found that the average undeformed chip thickness decreases with the increase in ultrasonic amplitude and the decrease in abrasive velocity. The simulation results of grinding forces show that the assistance of axial ultrasonic vibration can effectively reduce the grinding forces，and the higher ultrasonic amplitude has a positive effect on the decrease in grinding forces compared with that during conventional grinding. Under the same grinding parameters，the grinding forces in the grinding of SiC ceramics are larger than those in the grinding of Al2O3 ceramics.
MI Zhao-yang，LIANG Zhi-qiang，WANG Xi-bin， ZHOU Tian-feng，ZHAO Wen-xiang， TIAN Meng.
A Simulation Investigation on Grinding Forces in Ultrasonic Assisted Grinding of Ceramics with Single Abrasive Grain byUsing SPH Method. Acta Armamentarii. 2015, 36(6): 1067-1073 https://doi.org/10.3969/j.issn.1000-1093.2015.06.015
{{custom_sec.title}}
{{custom_sec.title}}
{{custom_sec.content}}
References
［1］ IshiharaM，Baba S，Takahashi T，et al. Fundamental thermo mechanical properties of SiC-based structural ceramics subjected to high energy particle irradiations [J]. Fusion Engineering and Design，2000，51/52：117-121. [2] 陈维平，韩孟岩，杨少锋.Al2O3陶瓷复合材料的研究进展[J].材料 工程，2011，21（3）：91-96. CHEN Wei-ping，HAN Meng-yan，YANG Shao-feng. Research progress of Al2O3 ceramic composites [J]. Journal of Materials Engineering, 2011，21(3)：91-96. (in Chinese) [3] SaitoT，Kawamoto H，Yamamoto T，et al. Lattice strain and dislocations in polished surfaces on sapphire [J]. Journal of the American Ceramic Society，2005，88(8)：2277-2285. [4] 周志雄，毛聪，周德旺，等.平面磨削温度及其对表面质量影响的实验研究[J].中国机械工程，2008，19(8)：980-984. ZHOU Zhi-xiong，MAO Cong，ZHOU De-wang，et al. Experimental investigation of grinding temperature and its effects on surface quality in surface grinding [J]. China Mechanical Engineering，2008，19(8)：980-984. (in Chinese) [5] LiangZ，Wu Y，Wang X，et al. A new two-dimensional ultrasonic assisted grinding (2D-UAG) method and its fundamental performance in monocrystal silicon machining [J]. International Journal of Machine Tools and Manufacture，2010，50(8)：728-736. [6] TawakoliT，Azarhoushang B，Mohammad R. Ultrasonic assisted dry grinding of 42CrMo4 [J]. The International Journal of Advanced Manufacturing Technology，2009，42(9/10)：883-891. [7] UhlmannE，Spur G. Surface formation in creep feed grinding of advanced ceramics with and without ultrasonic assistance [J]. CIRP Annals-Manufacturing Technology，1998，47(1)：249-252. [8] 徐世龙，林建忠，杨玉廷.基于SPH方法的磨削机理仿真研究[J].制造技术与机床，2012(12)：136-139. XU Shi-long，LIN Jian-zhong，YANG Yu-ting. Simulation study of grinding mechanism based on SPH [J]. Manufacturing Technology & Machine Tool，2012(12)：136-139. (in Chinese) [9] LucyL. A numerical approach to the testing of the fission hypothesis [J]. Astronomical Journal，1977，82（12）：1013-1024. [10] GingoldR，Monaghan J. Smoothed particle hydrodynamics：theory and application to non-spherical stars [J]. Monthly Notices of the Royal Astronomical Society，1977，181（3）：375-389. [11] MonaghanJ. An introduction to SPH [J]. Computer Physics Communications，1988，48(1)：89-96. [12] LiW，Yin S，Wang X. Numerical investigations of the effect of oblique impact on particle deformation in cold spraying by the SPH method [J]. Applied Surface Science，2010，256(12)：3725-3734. [13] GuoX，Wei Y，Jin J，et al. A numerical model for optical glass cutting based on SPH method [J]. The International Journal of Advanced Manufacturing Technology，2013，68（5/6/7/8）：1277- 1283. [14] LimidoJ，Espinosa C，Salaun M，et al. SPH method applied to high speed cutting modelling [J]. International Journal of Mechanical Sciences，2007，49(7)：898-908. [15] 宿崇，施志辉，刘元伟.陶瓷CBN砂轮地貌建模与磨削仿真[J]. 中国机械工程，2012，23(14)：1742-1745. SU Chong，SHI Zhi-hui，LIU Yuan-wei. Topography modeling and grinding simulation of vitrified bonded CBN wheel [J]. China Mechanical Engineering，2012，23(14)：1742-1745. (in Chinese) [16] WuY，Nomura M，Feng Z，et al. Modeling of grinding force in constant-depth-of-cut ultrasonically assisted grinding [J]. Materials Science Forum，2004，471/472：101-106. [17] MalkinS. Grinding technology：theory and applications of machining with abrasives [M]. Los Angeles, US: Society of Manufacturing Engineers，1989：35-45. [18] 任敬心，康仁科，史兴宽. 难加工材料的磨削[M]. 北京：国防工业出版社，1999：20-22. REN Jing-xin，KANG Ren-ke，SHI Xing-kuan. Grinding of difficult-to-cut materials[M]. Beijing：National Defense Industry Press，1999：20-22. (in Chinese) [19] CroninD，Bui K，Kaufmann C，et al. Implementation and validation of the Johnson-Holmquist ceramic material model in LS-Dyna[C]∥4th European LS-DYNA Users Conference. Ulm, Germany：ARUP，2003.
