The shifting process of automatic transmission is an alternating process of two actuators filling and draining the hydraulic oil. The improper oil filling and draining of two shifting actuators may cause power interruption or too much overlap, power lose, impact of shifting and aggravated wear of shift actuator. Lagrange equation is used to establish the dynamic equation of the shifting process by taking Allison automatic transmission (HD4070PR) as the study subject. The timing method of two shifting actuators filling and draining hydraulic oil during shifting process is analyzed on the basis of the equation, and verified by real vehicle test. The research results show that, for the upshifting process, the power shifting can be realized, and the impact of shifting can be reduced through the rational power lap;and for the downshift process, since the emergence of power interruption is inevitable, only the loss of the power should be reduced as far as possible.
Key words
control science and technology /
hydraulic mechanical automatic transmission /
shifting actuator /
timing method
{{custom_keyword}} /
{{custom_sec.title}}
{{custom_sec.title}}
{{custom_sec.content}}
References
［1］ 张 涛，陶刚，陈慧岩.电控自动变速器升挡转矩相控制策略[J]. 汽车工程，2013,35（2）：173-178.
ZHANG Tao,TAO Gang ,CHEN Hui-yan. Control strategy for the torque phase in up-shift process of an electrically-controlled automatic transmission[J]. Automotive Engineering, 2013,35（2）：173-178.（in Chinese）
[2] Zhang Tao，Tao Gang，Chen Hui-yan．Research on fill phase control strategy of shifting clutch［C］∥IEEE International Conference on Vehicular Electronics and Safety (ICVES). Beijing, China: IEEE,2011:34-38.
[3] Gao Bing-zhao. Clutch slip control of automatic transmission using backstepping technique[C]∥ICROS-SICE International Joint Conference.Fukuoka: IEEE，2009:3015-3019．
[4] Sarawoot Watechagit M S. Modeling and estimation for stepped automatic transmission with clutch-to -clutch shift technology[D]. Ohio: The Ohio State University, 2004.
[5] YasushiNarita.Improving automatic transmission shift quality by feedbackcontrol with a turbine speed sensor, SAE Paper No.911938 ［R］. US: SAE, 1991.
[6] WatechagitS, Srinivasan K. Implementation of on-line clutch pressure estimation for stepped automatic transmissions[C]∥AmericanControl Conference. Portland, US：AACC，2005：1607-1612.
[7] 张勇, 许纯新, 宋健，等. 行星齿轮变速箱换挡过程的建模与仿真[J]. 吉林大学学报：工学版, 2002, 32（1）:24-27.
ZHANG Yong, XU Chun-xin, SONG Jian, et al. Modeling and simulation of shifting process of the planetary gearbox[J].Journal of Jilin University： Engineering and Technology Edition, 2002, 32(1):24-27.（in Chinese）
[8] 程钢, 刘维平.行星变速箱换挡过程动态仿真研究[J].装甲兵工程学院学报, 2002, 16（3）：29-33.
CHENG Gang， LIU Wei-ping. Study on simulating the gear-shifting process of the planetary gearbox[J].Journal of Academy of Armored Force Engineering, 2002, 16(3):29-33.（in Chinese）
{{custom_fnGroup.title_en}}
Footnotes
{{custom_fn.content}}
