The protective performance of foam aluminum-Al composite structures with different densities and thicknesses are investigated with conventional and improved split Hopkinson pressure bars (SHPB). The experimental results demonstrate that, when foam Aluminum is used as interlayer, the primary stress wave is divided into several stress waves. The time of stress wave arriving at a back plate is postponed, and the wave intensity decreases. The impact of stress wave decreases more clearly with the increase in thickness of interlayer. When foam aluminum-Al composite structure is used as faceplate, the pulse width broadens, the rising edge is improved, and the wave intensity reduces. At the same time, the foam aluminum-Al composite structures can absorb a large part of impact energy, which can be served as stress wave protective material. With the increase in thickness and relative density of the foam aluminum, the wave shaping effect is more significant. The wave intensity reduces, the rising slop becomes flat, however the stress wave pulse changes little. The influence of Al plate thickness on composite structure can be ignored.
Key words
metallic material /
foam Aluminum composite structure /
stress wave protective performance /
relative density
{{custom_keyword}} /
{{custom_sec.title}}
{{custom_sec.title}}
{{custom_sec.content}}
References
［1］ Gibson L J, Ashby M F. Cellular solids. structure and properties[M]. 2nd ed. UK: Cambridge University Press, 1997.
[2］ 董永香, 黄晨光, 段祝平. 多层介质对应力波传播特性影响分析[J]. 高压物理学报, 2005, 19(1): 59-65.
DONG Yong-xiang, HUANG Chen-guang, DUAN Zhu-ping. Analysis on the influence of multi-layered media on stress wave propagation[J]. Chinese Journal of High Pressure Physics, 2005, 19(1): 59-65. (in Chinese)
[3］ 石少卿, 刘仁辉, 汪敏. 钢板-泡沫铝-钢板新型复合结构降低爆炸冲击波性能研究[J]. 振动与冲击, 2008, 27(4): 143-146.
SHI Shao-qing, LIU Ren-hui, WANG Min. Shock wave reduction behavior of a new compound structure composed of a foam Aluminum layer between two steel plates[J]. Journal of Vibration and Shock, 2008, 27(4):143-146. (in Chinese)
[4］ 王宇新, 顾元宪, 孙明. 冲击载荷作用下多孔材料复合结构防爆理论计算[J]. 兵工学报, 2006, 27(2):375-379.
WANG Yu-xin, GU Yuan-xian, SUN Ming. Blast-resistant calculation of compound structure with porous material under impact load[J]. Acta Armamentari, 2006, 27(2):375-379. (in Chinese)
[5］ 田杰. 泡沫铝的冲击波衰减和抗爆震特性研究[D]. 合肥: 中国科学技术大学, 2006.
TIAN Jie. Effect of energy absorption capacity and blast resistant of foam Al [D]. Hefei: University of Science and Technology of China, 2006. (in Chinese)
[6］ Gupta Y M, Ding J L. Impact load spreading in layered materials and strctures: concept and quantitative measure[J]. International Journal of Impact Engieering, 2002,27:277-291.
[7］ 王礼立. 应力波基础[M]. 北京: 国防工业出版社, 1985.
WANG Li-li. The foundation of stress wave[M]. Beijing: National Defense Idustry Press, 1985. (in Chinese)
{{custom_fnGroup.title_en}}
Footnotes
{{custom_fn.content}}
