Modeling and Design of signal-oriented General Purpose Automatic Test System

YU Jin-song;BAO Xiao-ming;ZHAO Quan

Acta Armamentarii ›› 2009, Vol. 30 ›› Issue (4) : 471-475. DOI: 10.3969/j.issn.1000-1093.2009.04.018
Paper

Modeling and Design of signal-oriented General Purpose Automatic Test System

  • YU Jin-song1, BAO Xiao-ming1, ZHAO Quan2
Author information +
History +

Abstract

Establishing a consistent model is the key point of resource management and configuration in a signal-oriented software architecture, which is a direction of the general purpose automatic test sys?tem (GPATS) software. A strategy of signal-oriented modeling and test engine based implementation was proposed. Based onthe hardware architecture of the GPATS, the system model, mainly composed of the automatic test equipment (ATE) model, the unit under test (UUT) model and the connection model, was implemented via relational database. Then ATE automatic choosing and configuration for each task was realized by using these models in the test engine between the main test program and the equipment operation in DOT NET development platform, which makes the test software independent of the real test resource ? This design was successfully applied to a certain type of photoelectric radar performance integrated test system.

Key words

automatic control technique / signal-oriented / automatic test system / software architec?ture / modeling

Cite this article

Download Citations
YU Jin-song, BAO Xiao-ming, ZHAO Quan. Modeling and Design of signal-oriented General Purpose Automatic Test System. Acta Armamentarii. 2009, 30(4): 471-475 https://doi.org/10.3969/j.issn.1000-1093.2009.04.018

References

[1] Thomas J Timcho. Signal-based modeling of ATE and UUTs us-ing COTS based software tools [C]//2005 IEEE AUTOTEST- CON Proceedings. US: IEEE, 1997:143-147.
[2] 于劲松.通用自动测试系统关键技术研究[D].北京:北京航空 航天大学,2004.
YU jin-song. Researcn on key techniques of general Durpose of automatic test system[D]. Beijing: Beijing University of Aeronau?tics and Astronautics, 2004. (in Chinese)
[3] 杨锁昌,孟晨,方新.利用引擎技术设计复杂装备检测系统 [J] _ 测控技术,2002,21(1):30-33.
YANG Suo-chang, MENG Cheng, FANG Xin. Using engine technology to design test system for complex weapons[J]. Mea?surement & Control Techniques, 2002,21 (I):30 — 33. (in Chi?nese)
[4] 路辉,李小白.自动测试系统资源模型化设计[J].测试技术学 报,2007,21(1) :53-57.
LU Hui, LI Xiao-bai, The modeling strategies of automatic test system[J] . Journal of Test and Measurement Technology, 2007, 21(1) :53-57. (in Chinese)
[5] SyedfahadGilani, Mike Gillespie. Visual Basic. NET 反射参考 手册[M].北京:清华大学出版社,2003.
Syed fahad Gilani, Mike Gillespie. Visual Basic. Net reflection technique manual[M]. Beijing: Tsinghua University Press, 2003.(in Chinese)

261

Accesses

0

Citation

Detail

Sections
Recommended

/