Interior Ballistics Model of Duplex Ammunition

Wu Zhilin

Acta Armamentarii ›› 2001, Vol. 22 ›› Issue (4) : 444-447. DOI: 10.3969/j.issn.1000-1093.2001.04.004
Paper

Interior Ballistics Model of Duplex Ammunition

  • Wu Zhilin
Author information +
History +

Abstract

An interior ballistics process of duplex ammunition is described in light of its characteristics. Computational assumption of duplex arrimunition is presented and the engraving resistance model of both bullets of the duplex ammunition is ^et up, while the interior ballistics computational equations of the cartridge are built up. Based on the equations, a computational program has been drawn up. With the aid of the computational model and the program, rules of interior ballistics for a 12.7mm duplex am?munition are obtained. The computational results agree well with the experimental results.

Key words

cartridge / duplex ammunition / interior ballistics

Cite this article

Download Citations
Wu Zhilin. Interior Ballistics Model of Duplex Ammunition. Acta Armamentarii. 2001, 22(4): 444-447 https://doi.org/10.3969/j.issn.1000-1093.2001.04.004

References

[1] 丘尔巴诺夫E B著;杨敬荣译.挤进时期内弹道学与挤进压カ计 算.北京:国防エ业出版社,1997.8?30
[2] 鲍廷玉,邱文坚.内弹道学.北京:北京理工大学出版社,1995. I卜20
[3] 曾思敏,童伟民,焦化南.弹带挤进过程的测试与研究.弹道学 报,1991, (4):2?8
[4] 何勇.挤进过程实验研究.弹道学报.19%,(4):33?36

Accesses

Citation

Detail

Sections
Recommended

/